Dude in my thread trashed you all and me . Who this clown

  • Thread starter Thread starter Techdeth
  • Start date Start date
51a82e5a61104.jpeg
 
BeZo said:
Fuck this place. The comments section of @Techdeth videos seems to be the happenin spot now. I'm going to go post over there.
Click to expand...
Can I come? We’re taking MY car though……
 
Techdeth said:
I like iPhone clips best . I have an iPhone . I know how my amps actually sound with it . Then when I hear iPhone clips I know what I’m hearing . I’m ok with it . Especially for now . I mean the best clips I like best are Jeremy’s iPhone clips . This will not be liked but the Amos I have do not sound like any clips I’ve heard with recording gear . Most of the time their recording signal makes ever clip sound the same by differbt amps . Take Reza or Kyle Bull . It’s a cool tone but their recording makes every clip sound the same . I’m going to do mic clips when I get computer really becasue you giys would rather hear it . No computer atm at all. Mine gone
Click to expand...
I like the way Ola and Johan Segeborn do it. Both close mic and room mic. Switch back and forth between the two and a blend of both. That typically gives a decent representation of the amp.
 
valve said:
well did i miss the point or one of you disciples?
Anyway, i am a bit relieved this is not a lesson
Click to expand...
I’m not being a dick I’m just responding. Don’t take that way . I don’t know you but if you here I know your cool . Don’t need to go there
 
MadAsAHatter said:
I like the way Ola and Johan Segeborn do it. Both close mic and room mic. Switch back and forth between the two and a blend of both. That typically gives a decent representation of the amp.
Click to expand...
I like that too
Omnipotent1 said:
Not necessarily… To get the education across you don’t need to hyper focus on capturing the tone or fidelity. He’s teaching theory.. They do that in books.. without audio.. 📚🤓
Click to expand...
I see where the confusion came from .
 
NowYou'rePlayingWithPower said:
Don't stress about it, Techy.
Apparently their dog ate their audio driver for their interface.
Probably just another paper tiger.
Click to expand...
that is funny!
actually it's an old Edirol UA-25 and i have a macBook Pro with Mac OS Montery. if you find a driver, please let me know.
if i start recording again, it will be formost for me and not for unknown people of the internet.
i can dig up some live accoustic stuff i did, before the lockdowns. but it's covers.
Or a shitty iphone clip! :D
 
valve said:
Well, spending $7000 on an amp and not having $70 (0,1%) for a mic is a bit odd.
i would never post a iphone clip. they always sound like shit to me. Lot's of additional clipping and weird EQ. what should that even tell us???
Click to expand...
At least one gets a basic idea.
 
Omnipotent1 said:
Not necessarily… To get the education across you don’t need to hyper focus on capturing the tone or fidelity. He’s teaching theory.. They do that in books.. without audio.. 📚🤓
Click to expand...
It's probably better without audio.
 
valve said:
that is funny!
actually it's an old Edirol UA-25 and i have a macBook Pro with Mac OS Montery. if you find a driver, please let me know.
if i start recording again, it will be formost for me and not for unknown people of the internet.
i can dig up some live accoustic stuff i did, before the lockdowns. but it's covers.
Or a shitty iphone clip! :D
Click to expand...

In case you get bored, but ymmv.

1) Start Mac in Recovery Mode (hold Cmd+R at startup).

2) Utilities -> Terminal

3) Run the following command to disable the Integrity Protection system:
csrutile disable

4) Get Drivers (UA-25 Driver Version 1.0.1 for Mac OS X Mavericks (10.9)):
1.gif
https://www.roland.c...8-8f6d-41312d891337/

File name: ua25-mx9d-v101.tgz
MD5: 0aae5df7da424f07d97f97c8f8e2a4db

5) Open Terminal and enter the following commands to patch the driver:
cd à HOME/Downloads
tar xvf ua25–mx9d–v101.tgz
cd ua25'mx9d'v101
pkgutil --expand UA25 USBDriver109.pkg DriverFiles
cd DriverFiles
sed -i "" "s/'11.0'/'13.0'/" . /Distribution
pkgutil --flatten . HOME/Downloads/RolandMonterey.pkg

6) The download folder is now a file called RolandMonterey.pkg. Install these via double click. Restart.

7) Enter the following command in the terminal to load the kernel extension of Roland:
sudo kmutil load -p /Library/Extensions/RDUSB0074Dev.kext

8) The following error message should come:
Error Domain-KMErrorDomain Code 27 "Extension with identifiers jp.co.roland.RDUSB0074Dev not approved to load. Please approve using System Preferences." UserInfo-NSLocalizedDescription with identifiers jp.co.roland.RDUSB0074Dev not approved to load. Please approve using System Preferences.
That is normal.

9) System Preferences -> Security & Privacy -> General -> Lock -> Allow allow kernel extension from Roland
 
NowYou'rePlayingWithPower said:
In case you get bored, but ymmv.

1) Start Mac in Recovery Mode (hold Cmd+R at startup).

2) Utilities -> Terminal

3) Run the following command to disable the Integrity Protection system:
csrutile disable

4) Get Drivers (UA-25 Driver Version 1.0.1 for Mac OS X Mavericks (10.9)):
1.gif
https://www.roland.c...8-8f6d-41312d891337/

File name: ua25-mx9d-v101.tgz
MD5: 0aae5df7da424f07d97f97c8f8e2a4db

5) Open Terminal and enter the following commands to patch the driver:
cd à HOME/Downloads
tar xvf ua25–mx9d–v101.tgz
cd ua25'mx9d'v101
pkgutil --expand UA25 USBDriver109.pkg DriverFiles
cd DriverFiles
sed -i "" "s/'11.0'/'13.0'/" . /Distribution
pkgutil --flatten . HOME/Downloads/RolandMonterey.pkg

6) The download folder is now a file called RolandMonterey.pkg. Install these via double click. Restart.

7) Enter the following command in the terminal to load the kernel extension of Roland:
sudo kmutil load -p /Library/Extensions/RDUSB0074Dev.kext

8) The following error message should come:
Error Domain-KMErrorDomain Code 27 "Extension with identifiers jp.co.roland.RDUSB0074Dev not approved to load. Please approve using System Preferences." UserInfo-NSLocalizedDescription with identifiers jp.co.roland.RDUSB0074Dev not approved to load. Please approve using System Preferences.
That is normal.

9) System Preferences -> Security & Privacy -> General -> Lock -> Allow allow kernel extension from Roland
Click to expand...
wow, thanks a lot!!!
I'll try this ASAP
 
You must log in or register to reply here.
Back
Top