Marshall JVM1H issues - Volume goes to zero suddenly and recovers with power off/on

Jakem

Jakem

Well-known member
Hi,

My Marshall 50th anniv 1W Marshall JVM is acting strangely; sometimes the volume goes to zero slowly and won’t recover until power off/on. Then sometimes the volume drops a lot, not going to zero, and all the distortion disappears. Anything I can check myself to diagnose the issue further?
 
Sounds like possibly a bad power tube .After I got my 2203 from Blake it started doing that . The powertubes got loose in shipping . Once I push them in tighter it stopped
 
You welcome . It will be a simple fix .
How’s the tones of it

I use it primarily for 80s rock tones with low gain level set on distortion channel and boosting it with some nice pedal. I have grown to love the DOD YJM308 in front of the amp if playing with my Malmsteen Stratocaster. If I want to play tighter and gainier stuff with other guitars then I use BB pre/Klon KTR/SD-1/TS808HW most of the time. It is such a nice practise amp and I presume the preamp circuit is exactly the same as in the bigger power versions of the JVM.
 
I use it primarily for 80s rock tones with low gain level set on distortion channel and boosting it with some nice pedal. I have grown to love the DOD YJM308 in front of the amp if playing with my Malmsteen Stratocaster. If I want to play tighter and gainier stuff with other guitars then I use BB pre/Klon KTR/SD-1/TS808HW most of the time. It is such a nice practise amp and I presume the preamp circuit is exactly the same as in the bigger power versions of the JVM.
Does it have a line out or anything to just use as a pre-amp?
I love the dod btw
 
Does it have a line out or anything to just use as a pre-amp?
I love the dod btw

The DOD is incredible especially paired with the YJM Strat! Instant Yngwie tones. 😁

If I remember correctly it has this emulated line out that I never use. It has an FX loop so easy to use it as a preamp from fx loop send.
 
The DOD is incredible especially paired with the YJM Strat! Instant Yngwie tones. 😁

If I remember correctly it has this emulated line out that I never use. It has an FX loop so easy to use it as a preamp from fx loop send.
Def that’s how to do it . I didn’t know it came with a loop
 
Did not have any spare ECC82s so I ordered two TAD 12AU7As for V1 (power) and V3 (tone stack, fx loop and cathode follower buffers). Should be here tomorrow. 🤘
 

Similar threads

Back
Top