Recent content by BZGS

  1. B

    Captor X 3rd party IRs which kHz?

    24bit 48khz mono I believe.
  2. B

    Captor X power switch?

    I have been using a 2 ft power strip with an on/off switch for Captor X, and it works great.
  3. B

    Can a Torpedo Captor take an overdriven Marshall Super Lead?

    I don't have a 100w Marshall head, but I do have a 50w Marshall 1987 MKII modded to 1972 metal face spec, which is the lower wattage version of 100w super lead. The in-level button needs to be set to low in Captor X while I turn both volume knobs on the Marshall to the max with a Maxon OD808...
  4. B

    Captor X - pre purchase question

    You can control your volume on Captor X. There is an output level knob you can adjust. Also you can control it by your audio interface. The attenuation has two levels, one is -20db and the other is -38db, which is way huge. You can check out some youtube videos and the volume can just cover...
  5. B

    Captor X disconnected and reconnected randomly?

    Torpedo Remote 5.3.12 formal version is available to download. Hope it also fixes your problem!
  6. B

    IR Loader Based Presets

    Hmmm, that's weird. I thought it was like what I said above, the presets jump over from IR LOADER to VIRTUAL CABINET. When you are saving the presets to Captor X, is there a window showing you the process of transferring data or presets to Captor X, like a progress bar? If you see that, and the...
  7. B

    Captor X disconnected and reconnected randomly?

    22 times recorded in the log with around 3 and a half hours left for today, what happened? That's crazy. I started to think about if it is really a"finished product".
  8. B

    IR Loader Based Presets

    Ha, I happened to know that. It is kind of tricky. The correct way to save your presets is as follows: 1: Under the IR LOARDER section, Click "SAVE" button, not the PRESET, that's where you will get the problem. 2: In the pop-out window, make sure you are under "Torpedo" section, then choose the...
  9. B

    Captor X disconnected and reconnected randomly?

    Yes, it keeps the connection via USB, so you can still adjust parameters in Torpedo Remote, no influence on the sound, not even a pause. Your log looks different than mine. When I use a formal version, my log looks like this: (Yes, it's been one month almost.) 15/12/2020 14:55:45: Leaving...
  10. B

    Captor X disconnected and reconnected randomly?

    11/01/2021 10:12:50: Leaving: Torpedo window creation That's when I started the debug version 2 11/01/2021 11:27:05: Device not detected correctly: 11/01/2021 12:17:00: Device not detected correctly: 11/01/2021 14:01:48: Device not detected correctly: 11/01/2021 14:12:04: Device not...
  11. B

    Captor X disconnected and reconnected randomly?

    After I checked out the log file and then find out, it actually happened 11 times on 11th January and 3 times on 12th January. The tech team told me that "Windows driver does not return all the information it is supposed to return", and the debug version 2 chose to ignore that since Torpedo X...
  12. B

    Captor X disconnected and reconnected randomly?

    That's very good! I believe you can help them to find out the actual reason behind it. At the very beginning, I had that problem happened in minutes, but it lasted for a long period of time after I downgraded the software to 5.3.6. Sometimes 4-5 hours, but 10 mins, 30 mins and so on happened...
  13. B

    Captor X disconnected and reconnected randomly?

    Great! I know I wouldn't be the only one who has the problem. What are the version of your Torpedo Remote and the firmware of your Captor X? I have been testing for almost one month and tried all three units I have. They all have the same issue no matter which USB port or cable I try. I even...
  14. B

    Problems with silent recording with the captor x

    My pleasure, and I just got my unit a few days ago. I also encountered a few problems with it. No, actually, them, since I have 2 units on hand. One is 16 Ohm, and the other one is 8 Ohm. However, both of them show the same problems. I contact the support team, but they thought the problem...
  15. B

    Problems with silent recording with the captor x

    Hmm, maybe you can try to reboot the device by pressing the pushbutton between OUT LEVEL and VOICING knobs. There is a small hole, and use a toothpick or any other small pin stuff to try it. If it doesn't work, then try to do a factory reset via Torpedo Remote software on your computer.
Top