Search results

I got reply from Peter S. and everything should be OK. Now we will just wait for the tubes to arrive from the distant land. I will gladly post my findings on these tubes, but Im pretty sure that our beloved "Chief Executive of Tone" has already made strong testing on these.

I tried MXR 10-band EQ with my VH4 and it worked well. I prefer it after the preamp, because it has much more radical effect than if used before the preamp stage. ...but to be honest, I absolutely find no use for it with this amp.

I will do this. Thank You.

Im facing time to retube the VH4 power plant. Last gig I already hit one red light (tube fault). I have gone through very many different power amp tubes and I could try something new again. So, are these Ruby EL34BeeGees available in Europe? Thanks. EDIT: mistype

Congratulations!

8 Ohm, but I consider the difference to be very marginal.

Glad to hear your amp is working again. 2. If you mean the fuses in back panel, these are not for the channels but one of each tube.

My bands other guitar player uses ENGL Invader. Very thick sounding beast!

Personally I would not install the TT diffusors, but that is not a recommendation just opinion. Of course some people like them alot, but I think it depends also what kind of sounds you are after. Those people who I have met and are using the diffusors are usually more "traditional" -type of...

I really love my Mako MAK2 so I would recommend that, but I do not know how it will suit Herbert. I drive it simultaneously with VH4 and it works great. I really love the sound and feel of that amp...or actually both of them...but different way. V. - Do you know how Juggernaut's Mako is modded...

To me it seems that the problem is in the new tubes and their matching, because the old quarted works fine. You need to check this from someone more qualified than I am, but I think that if you use the tubes with pairwise "non balanced" current readings there will be no potential problems for...

Does the same happen if you change the order of the tubes in the quartet? If the mismatched reading follows a particular tube the problem is then in the not-that-well-matched tube. If the mismached reading stays in the same tube position/socket even though you inserted different tube in the...

Thanks for the specifications Till. I was in hurry and did not dare to write the long detailed answer here at work. :D In some units you have analog hard-bypass as well so there is also unconverted signal present. Usually this is only done by relays on thus is either full on or off, but...

As you said yourself "at least some of your signal is ADA converted". Some of your signal is processed, but in the serial loop all of your signal will be processed. :thumbsup: 100% wet means, that the signal going through your unit in the parallel loop will be converted and processed 100%...

Are you sure your tubes are OK?

What are you guys talking about?

I don't want to sound rude, but Im pretty sure that you are doing something wrong. I control my VH4 (+ other equipment) with GCP and everything is working extremely well. Recently I wrote here short instructions how to program GCP with VH4 or Herbert (see link bellow)...

I have a Diezel VH4 and Mesa Mark V -combo. Both are wonderful amps capable of many extremely great tones. Peronally I find VH4 easier to dial in the "perfect" tone for my purposes. Also the loops are better in VH4 and having the 4th channel is a great advantage. Im using mainly 7 and 8-string...

Last night I checked how I configured my presets and I remembered wrong. I have done them with PCs not with CCs. I apologize the misinformation I suggested. If Diezels do not understand CCs I think something should be done to this thread. viewtopic.php?f=14&t=32940&start=0

Really? :confused: I guess I need to check my GCP for the mute, channel insert and send2 patches again.