.

  • Thread starter Thread starter codyjarret
  • Start date Start date
Oh man, this is gonna be awesome :rock: :rock: :rock:

Looking forward to watching the clips!!
 
Very cool! You sure that table can hold both of those? :lol: :LOL:

So those filters are just laying on top of the other components?
 
midnightlaundry":2awfjm7r said:
Interesting how that amp has certain things from the early schematic and certain things from the later but those 68s have those same things 'reversed'. Like; the fusion amp uses newer V2a cathode arrangement vs 68s use old and fusion amp uses older .022uF Bright coupler vs newer .0022uF Bright coupler in Michael's.

The link in that thread to the EL34World discussion from 2014 was a good read too. The DPDT switch is a cool option. http://el34world.com/Forum/index.php?topic=17556.0
 
SpiderWars":aa0zuux3 said:
midnightlaundry":aa0zuux3 said:
Interesting how that amp has certain things from the early schematic and certain things from the later but those 68s have those same things 'reversed'. Like; the fusion amp uses newer V2a cathode arrangement vs 68s use old and fusion amp uses older .022uF Bright coupler vs newer .0022uF Bright coupler in Michael's.

The link in that thread to the EL34World discussion from 2014 was a good read too. The DPDT switch is a cool option. http://el34world.com/Forum/index.php?topic=17556.0

Yes, that DPDT switch is a great idea.

My idea was to make the "one wire mod" switchable use the dead polarity switch in the front of most of these Majors. Make some use out of it. :)
 
Cool. That amp sounds pretty gainy from what I can tell which is a good thing. It must be pretty solid feeling with Ultra Linear wiring.
 
AndyK":1v5x8du7 said:
Gotta think the stock amp with a cool OD would be awesome!
Can't use a boost in front its "ultra-linear".
 
So this is what every amp builder is trying to copy? Why buy anything but a Marshall?
 
That pre-mod clip didn't sound that loud to me. What were your settings? Just curious.
 
Progress! Interesting that your amp had an 820R on V2 cathode. I've been looking at that and it seems it's another one of those things that varied depending on year.
 
Back
Top