TotallyRadGuitars
Well-known member
Same as my other thread, this is even more various parts I've accumulated and don't think I'll need (at least for a while..)
Basic Terms
All prices are PayPal F&F, or add 3% for G&S.
All prices are without shipping, lots of small stuff so if you buy more than one I can combine them into one box and save some money there. Too hard to estimate the shipping but I'll always use the least expensive UPS method or USPS flat rate box, unless you specifically tell me you want something different.
I tried to research and price everything fairly but if I'm totally off on something, send me a message.
Bridges
$200 - Original Floyd Rose, Chrome, 80s. Includes trem arm, but the arm fits a little loosely in the socket, so I've included one of the little conversion pieces so it can use a collared trem arm. Also includes the chrome string tree, two chrome wood screws, the allen key holder (missing the guide pins, someone sanded those off), and the matching R2 german made locking nut (with nut screws etc). Good condition all around, a little wear on the low E saddle and I'd recommend taking a wire brush to the contact points of the knife edges and wood screws just for peace of mind but I had it on a project guitar recently as-is and it returned to pitch perfectly like you'd expect. 42mm block.
$180 - Schaller Lockmeister, black. These came out recently, as soon as the OFR patents expired. Same hardened steel base plates and saddles, as OFR's, made in Germany by Schaller just like an OFR. Can't tell the difference besides the name stamped on the plate. Includes the black stud screws (but not the studs themselves) and the allen key holder. Not sure where the other parts ended up so just what is pictured here.
$200 - Original Floyd Rose, Black, 80s. Includes trem arm, two black wood screws, and black string tree. I think this is a 37mm block. Includes R2 locking nut but if you would rather have the R5 (below), I'll keep the R2 and you can have the R5 for $20 more.
$40 - R5 OFR Locking nut, Black, German, 80s. Unless someone wants it with the black OFR above instead of the R2.
Tuners
$50 - Gotoh SG381 tuners, 6-in-line Gold with 135 degree offset screw. Drop in replacement for Schaller M6's like on our Kramers. Barely used, still stiff even, no missing finish. Includes screws.
$25 - Gotoh tuners, 6-in-line black, with 135 degree offset screw. Came from an F-3000, 80s era. Look just like Schaller M6's. These are in good shape, not missing finish, a little dull and slightly looser feeling than the brand new ones above but still very good overall. Includes screws.
$100 - Schaller M6 tuners, 6-in-line chrome, with 135 degree offset screw. Came on... something? That had chrome hardware instead of the correct black. Could stand to have a good cleaning but they look appropriate for your latest 80s project. Includes screws.
Thanks for looking.
Basic Terms
All prices are PayPal F&F, or add 3% for G&S.
All prices are without shipping, lots of small stuff so if you buy more than one I can combine them into one box and save some money there. Too hard to estimate the shipping but I'll always use the least expensive UPS method or USPS flat rate box, unless you specifically tell me you want something different.
I tried to research and price everything fairly but if I'm totally off on something, send me a message.
Bridges
$200 - Original Floyd Rose, Chrome, 80s. Includes trem arm, but the arm fits a little loosely in the socket, so I've included one of the little conversion pieces so it can use a collared trem arm. Also includes the chrome string tree, two chrome wood screws, the allen key holder (missing the guide pins, someone sanded those off), and the matching R2 german made locking nut (with nut screws etc). Good condition all around, a little wear on the low E saddle and I'd recommend taking a wire brush to the contact points of the knife edges and wood screws just for peace of mind but I had it on a project guitar recently as-is and it returned to pitch perfectly like you'd expect. 42mm block.
$180 - Schaller Lockmeister, black. These came out recently, as soon as the OFR patents expired. Same hardened steel base plates and saddles, as OFR's, made in Germany by Schaller just like an OFR. Can't tell the difference besides the name stamped on the plate. Includes the black stud screws (but not the studs themselves) and the allen key holder. Not sure where the other parts ended up so just what is pictured here.
$200 - Original Floyd Rose, Black, 80s. Includes trem arm, two black wood screws, and black string tree. I think this is a 37mm block. Includes R2 locking nut but if you would rather have the R5 (below), I'll keep the R2 and you can have the R5 for $20 more.
$40 - R5 OFR Locking nut, Black, German, 80s. Unless someone wants it with the black OFR above instead of the R2.
Tuners
$50 - Gotoh SG381 tuners, 6-in-line Gold with 135 degree offset screw. Drop in replacement for Schaller M6's like on our Kramers. Barely used, still stiff even, no missing finish. Includes screws.
$25 - Gotoh tuners, 6-in-line black, with 135 degree offset screw. Came from an F-3000, 80s era. Look just like Schaller M6's. These are in good shape, not missing finish, a little dull and slightly looser feeling than the brand new ones above but still very good overall. Includes screws.
$100 - Schaller M6 tuners, 6-in-line chrome, with 135 degree offset screw. Came on... something? That had chrome hardware instead of the correct black. Could stand to have a good cleaning but they look appropriate for your latest 80s project. Includes screws.
Thanks for looking.
