
SpiderWars
Well-known member
When I bought the chassis for my recent Matchless Lightning-inspired build I bought two of them because they were the last 2 obsolete Ceriatone chassis/faceplates and Nik gave me a deal. I considered making another Lightning but decided to try a 2xEL84 Trainwreck Liverpool as the base for the second chassis. And this time a head instead of combo. I'm adding a post-PI MV but otherwise starting out pretty faithful to the Trainwreck circuit. Mercury iron, sort of a custom set but available on their site (basically just added endbells to the OT), this amp uses a big resistor instead of a choke. The original uses a 6k6 primary Z OT with 4xEL84s. This OT is a 6k6 primary Z OT but at 2/4/8 ohm secondary. I'll be running it at 4/8/16 so it should be a good match. 253-0-253 PT so voltages will be pretty low. Right now only the initial assembly is done, lots left to do.
Hopefully the faceplate will eventually be replaced with something pro (same for the Lightning). This is just the Lightning faceplate reversed. Works for now and I'll keep the indicator light easy to remove.
EDIT: pic with cab, sitting atop its older sibling.
Hopefully the faceplate will eventually be replaced with something pro (same for the Lightning). This is just the Lightning faceplate reversed. Works for now and I'll keep the indicator light easy to remove.

EDIT: pic with cab, sitting atop its older sibling.

Last edited: