A few quick questions

  • Thread starter Thread starter Hylndr11
  • Start date Start date
H

Hylndr11

New member
Hello, got a few quick questions for you guys......is the picture below an older footswitch as it looks nothing like the columbus also am I correct that the diezel footswitches memorize your settings so you can dial in your tone and then save it, regardless of moved knobs on the head??
 

Attachments

  • 5078_1.JPG
    5078_1.JPG
    21.9 KB · Views: 878
no, you cannot do that. What you can do is have an fx unit in the loop and save your presets on a given channel (lets say, ch.1 with 300msec delay in bank #1, then ch.2 with some reverb in bank#2, etc... but the settings on the amp will be the same always. now the Fx unit, given it's a midi one (gmajor, rocktron, etc etc etc) will remember your settings, but the amp won't.
 
Wow!! I REALLY want that footswitch!!! I´ve been searching for a footswitch with those functions since I don´t use any rackgear!
You selling? ;)
 
hey udo, but you can do all that with a Colombus (change channels/mute/masters/loop/inserts)
 
But can you set the columbus like this pedal? This isn´t a traditional midi-footswitch because every switch has just one designated function. Like the midcut switch is a masterswitch....understand what I´m trying to get at? :D
 
oh yeah I understand perfectly. But with the Colombus you can do all that and then more...... I believe. :)
 
Yeah the Columbus can do alot of stuff, but I don´t think you can have a midcut-master switch on the columbus, you have to save presets for all channels with and without midcut. And since I don´t use any MIDI effects I don´t really need such an advanced footswitch :no:
 
Does this footswitch work well with all version of Herbert?
 
This footswitch don´t works with any Herbert !!!!

It was sold to customers with special controller chip.
 
I forgot to mention that we can send the
controller chip that works with the footswitch.
 
Peter Diezel":36xpc1tl said:
I forgot to mention that we can send the
controller chip that works with the footswitch.
Click to expand...

So is hard to install/setup and controller chip?
 
Sorry for rebirth this post, but i need to solve one problem:

I am a new Diezel Customer, my amp is Herbert and i bought the same footswitch that you are talking about, but the guy who sold me the amp didnt send me the controller chip, so my question is:

Where can i find that controller chip and what i must do to get it?

Thanks you all guys

Greetings from Spain.
 
Welcome to the board :thumbsup:

First check if the footswitch is for Herbert or VH4.

If that is correct and You it don´t works send an
email to service (at) diezelamplification (dot) com
to get a new controller chip. I need Your address, phone
number and the serial number of the amp.

Best,
Peter
 
Thank you Peter, yes, the amp is this: .

I´ll send a message to Service with my address, Telephone number..etc... and i will ask for the chip.

Thank you for your quick reply
 

Attachments

  • 31072011241.jpg
    31072011241.jpg
    449 KB · Views: 752
The footswitch has a mark if it is for the Herbert
or the VH4. Please let me know.
 
You must log in or register to reply here.
Back
Top