Any recommendations for ADA-MP-1 preamp repair?

  • Thread starter Thread starter LanierP
  • Start date Start date
LanierP

LanierP

Active member
Hey guys,
Reaching out to see if anyone has a line on getting my MP-1 fixed. Extremely low volume using front jack, led lights to the left of front input jack don't seem to work,,,it's been modded by the previous owner to take an extra preamp/gain stage. Need it looked over and issues assessed. Can ship wherever needed,,, these things are fairly light.
Any help is appreciated.
Len
 
Hey guys,
Reaching out to see if anyone has a line on getting my MP-1 fixed. Extremely low volume using front jack, led lights to the left of front input jack don't seem to work,,,it's been modded by the previous owner to take an extra preamp/gain stage. Need it looked over and issues assessed. Can ship wherever needed,,, these things are fairly light.
Any help is appreciated.
Len
Reach out to Philippe. He still roams the ADA Depot Forum
https://marshalljmpmodshop.net/

He's located in Belgium, but he's your best bet for getting your ADA Fixed as Far as I know.

If you're handy with a solder iron, you may want to post on the ADA Depot Forum and see if anyone has suggestions on how to fix it.

You can also check this schematic to see if its any help to fix the issue:
https://marshalljmpmodshop.net/ADA-MP1-input-jack-harness-mp1-level2.pdf

Good luck
 
Last edited:
Back
Top