anyone have photos of R2 floyd rose nut on 1.65" nut?

[sixstringking713]

anyone have photos of R2 floyd rose nut on 1.65" nut?

looking to buy a musikraft neck and not sure if I should do this or just stick with 1-5/8" nut w/ R2 nut

 

[Chubtone]

anyone have photos of R2 floyd rose nut on 1.65" nut?

looking to buy a musikraft neck and not sure if I should do this or just stick with 1-5/8" nut w/ R2 nut

1.65" will be fine with an R2 nut. I think we are talking about 1/64" on each side of the nut extra. Barely noticeable.

 

[tom_h]

Most FR equipped ESP, ESP/LTD, Schecters are 1.65" nut width with an R2 nut

 

[sixstringking713]

Most FR equipped ESP, ESP/LTD, Schecters are 1.65" nut width with an R2 nut

are you sure about the schecters ?

 

[tom_h]

Most FR equipped ESP, ESP/LTD, Schecters are 1.65" nut width with an R2 nut

are you sure about the schecters ?

Schecter (and ESP) generally use a 42mm nut width (see attached spec sheet for the Hellraiser C1FR). 42mm translates roughly to 1.65". The locking nut used on these guitars is an R2. I have owned several ESP and Schecter guitars. I endorsed ESP for almost 10 years. Now with Schecter for the past 6 years.

 

[tom_h]

Here's a photo:

 

[sixstringking713]

Most FR equipped ESP, ESP/LTD, Schecters are 1.65" nut width with an R2 nut

are you sure about the schecters ?

Schecter (and ESP) generally use a 42mm nut width (see attached spec sheet for the Hellraiser C1FR). 42mm translates roughly to 1.65". The locking nut used on these guitars is an R2. I have owned several ESP and Schecter guitars. I endorsed ESP for almost 10 years. Now with Schecter for the past 6 years.

Thanks for the info and the photo... I'm confused why their website says 1-5/8" nut??

What other models of theirs use 1.65" nut w/ R2 Locking Floyd? The sam ash here has a sinister gates, and some other floyd equipped guitar, do you think it has it? (even though their site says 1-5/8")?

http://www.schecterguitars.com/guitars/hellraiser-c-1-fr-detail