Anyone using a pedal board for their modeler/power amp setup?

[bikerdude2]

I’m sure someone has done it. Trying to make my setup/breakdown quicker. Only need room for a Hotone Ampero, and a ISP Stealth with both power bricks. Would like to keep everything plugged in to the pedal board, so setup is a cable to my cab, 1 power cord, and a cable into the floorboard. Any decently priced boards that have power for the wall warts? Thanks in advance!

 

[tjnx]

I just attached a power strip / surge protector on mine using velcro or zip ties. I had enough room on top but most just hide it under the board.

 

[CoreyW]

BTPA Has pass through plates and if you're using a name brand board they should have some that will fit it. I know they do for Pedaltrain boards. You can customize what you want in the panel, power, guitar in, amp out, fx loop send/return, midi, usb, you can get pretty creative with them.

https://btpa.com/Bulk-Product/Hardware/Pedaltrain-Panels/

When I ordered mine years ago I just emailed them what I had and what I wanted then they put it together for me.

 

[jski59]

I'd mount something like this...

https://www.amazon.com/Conntek-2-In...eywords=iec+power+strip&qid=1776216386&sr=8-1