
cujo
Active member
Has anyone seen or heard it at namm?? Ive been waiting for this for awhile ...cant wait !
http://www.budda.com/news/?a=716
Budda AS Preceptor features:
120 Watts into 16, 8 or 4 ohms with half-power switch
3 channels: clean, rhythm and lead
Five 12AX7 preamp tubes used in three completely independent channels
One 12AX7 tube used in tube-driven stomp box style OVER-BOOST circuit
One 12AX7 tube used as the phase splitter driving the power amp
Four EL-34 power amp tubes and convertible to use four 6L6GC tubes
LED indication of correct output tube biasing
Two 5U4 rectifier tubes convertible to use 5AR4/GZ34 tubes
Unique PowerPan™ control allows panning between solid state and tube rectification
Power amp can use 6L6GC or EL-34 tubes (plus KT66, KT88, 5881 and 6CA7 with re-biasing)
Rectifier can use 5U4, 5AR4 or GZ34 tubes
Full / Half Power switch
Independent preamp EQ (Bass, Mid, Treble), Presence and Resonance controls per channel
Silent LDR MIDI controlled channel switching
High quality audio grade resistors and poly caps throughout
Three effects loops with independent Send and Mix controls and Channel or Global options
Real spring reverb with separate Reverb level control per channel
Footswitchable Master Boost with user defined boost level
Slave Out and Preamp Out/Power Amp In link jacks
Massive custom designed output transformer
Overboost stompbox style lead boost on each channel
Slave output/Power amp input
Cabinet impedance switch (4, 8 or 16 Ohms)
Heavy duty Power and Standby toggle switches
High and low level 1/4" inputs
Ceramic tube sockets
Specially designed 10-button multi-function foot controller (included)
Stores 9 custom presets, and provides extensive MIDI control for automation
http://www.budda.com/news/?a=716
Budda AS Preceptor features:
120 Watts into 16, 8 or 4 ohms with half-power switch
3 channels: clean, rhythm and lead
Five 12AX7 preamp tubes used in three completely independent channels
One 12AX7 tube used in tube-driven stomp box style OVER-BOOST circuit
One 12AX7 tube used as the phase splitter driving the power amp
Four EL-34 power amp tubes and convertible to use four 6L6GC tubes
LED indication of correct output tube biasing
Two 5U4 rectifier tubes convertible to use 5AR4/GZ34 tubes
Unique PowerPan™ control allows panning between solid state and tube rectification
Power amp can use 6L6GC or EL-34 tubes (plus KT66, KT88, 5881 and 6CA7 with re-biasing)
Rectifier can use 5U4, 5AR4 or GZ34 tubes
Full / Half Power switch
Independent preamp EQ (Bass, Mid, Treble), Presence and Resonance controls per channel
Silent LDR MIDI controlled channel switching
High quality audio grade resistors and poly caps throughout
Three effects loops with independent Send and Mix controls and Channel or Global options
Real spring reverb with separate Reverb level control per channel
Footswitchable Master Boost with user defined boost level
Slave Out and Preamp Out/Power Amp In link jacks
Massive custom designed output transformer
Overboost stompbox style lead boost on each channel
Slave output/Power amp input
Cabinet impedance switch (4, 8 or 16 Ohms)
Heavy duty Power and Standby toggle switches
High and low level 1/4" inputs
Ceramic tube sockets
Specially designed 10-button multi-function foot controller (included)
Stores 9 custom presets, and provides extensive MIDI control for automation