Axe fx problem, Peak lights are staying pegged out! Help.

[Splawnman90]

Not real sure on why my Axe Fx is doing this but the lights are staying pegged out even when nothing is connected on the back outputs etc. Any solutions to this? Thanks in advance!

 

[BYTOR]

I take it you've already plugged it out/turned it off & on etc.......

Ask for advice on the Fractal forum. They are very helpful.

 

[Chris O]

Sounds like something I had happen with my A2 MkI -- needed a "jumper" to re-boot it. Had to order it from Fractal.

 

[Splawnman90]

Sounds like something I had happen with my A2 MkI -- needed a "jumper" to re-boot it. Had to order it from Fractal.

what exactly is a jumper?

thanks for checkin this post out

 

[Chris O]

Hard to explain - basically a little plastic thing you put on one of the pins on the circuit board that "jumps" the circuit to allow it to re-boot. Call fractal support, and let them know about what's happening, and they'll let you know if that is what you need to do.