Axess Electronics FX1 custom cable help pelase??

  • Thread starter Thread starter adrianher
  • Start date Start date
A

adrianher

Member
Hi guys, I've bought a custom cable to connect the fx1 to my rg16.

I don't know what happened during the shipping but the 7 pin midi connector was completely unsoldered with all wires out.

I've asked the seller the info to resolder it and he doesn't know how to do it.

I've checked many forums without good results.

So I checked the fx1 owner manual and it says the "To Rack" jack with Xlr 5 pins is wired this way:

Pin1 9vac
Pin2 n/c
Pin3 9vac
Pin4 Midi out pin#4
Pin5 midi out pin#5

The rg16 manual doesn't give me any info.

Any suggestion on how to solder the 7 pin midi connector?

Thanks
Adrian
 
Hey Adrian,

I'd suggest asking this question over at the Huge Racks Forum, as Mario (owner of Axess Electronics) does still post there on occasion. I have an Axess FX1 and custom cable too. I'm sure either Mario or one of the other members who have an FX1 cable could give you the info you need.

Good luck.

John
 
You must log in or register to reply here.
Back
Top