steve_k
New member
Anybody got an electronic copy of the Axess MFC5 midi switcher manual? Can't remember who I bought one from here and there wasn't a manual included.
Steve
Steve
P
Paul A
New member
steve_k
New member
thanks dude. i went to the site not long ago and couldn't get to the link.
A
Anonymous
Guest
Hi Steve, I've got the manual on my PC because I have that pedal.
I can e mail a copy if you get stuck.
Are you copying my rig ??
JMP1 and same controller ????
A tip with the controller, make notes on the mapping details because once you set a program, it's impossible to find the settings again... nightmare
I can e mail a copy if you get stuck.
Are you copying my rig ??
JMP1 and same controller ????
A tip with the controller, make notes on the mapping details because once you set a program, it's impossible to find the settings again... nightmare
steve_k
New member
wolf5150":28k8r30u said:Hi Steve, I've got the manual on my PC because I have that pedal.
I can e mail a copy if you get stuck.
Are you copying my rig ??
JMP1 and same controller ????
A tip with the controller, make notes on the mapping details because once you set a program, it's impossible to find the settings again... nightmare
me? no............
i haven't even used it yet. still got my bradshaw rs10. but, i was building a couple different set ups and gonna use this one just knocking around in the cave with the RJM Y-Not or a Gizmo. there's too few a buttons to get too radical with it. but, nice small foot print.
steve
A
Anonymous
Guest
&
>V<
New member
Hi guys,
I would also appreciate a copy of the MFC5 manual. Could anyone mail me a copy, please?
Anyway, what happebed to Mario and Axess? Does anyone know the details?
Best regards,
>V<
I would also appreciate a copy of the MFC5 manual. Could anyone mail me a copy, please?
Anyway, what happebed to Mario and Axess? Does anyone know the details?
Best regards,
>V<
A
Anonymous
Guest
i bet that clock next to the tubescreamer is shielding your signal from that fulldrive....does it sound different without it there
A
Anonymous
Guest
>V< get the manual OK ??
Anyone else need a copy, just contact me.
Anyone else need a copy, just contact me.
&
>V<
New member
Yes, thank you! ;-)
smdb
Moderator
wolf5150":1a1tcayn said:>V< get the manual OK ??
Anyone else need a copy, just contact me.
Could I get you to send me a copy? Please?
I pmd my email to you
L
lenoboy
New member
I just purchased an Axess MFC 5 midi switcher form Ebay and the seller did not provide the manual. I saw that several people here have one on their computer and I would really appreciate if someone could send me a copy. The Axess website is no longer available. Thanks, Paul
lenoboy@verizon.net[/b]
lenoboy@verizon.net[/b]
smdb
Moderator
I emailed you a copy
