Baron Snott Watt

[sandman]

I just got this little beast in today. Worked out a deal with MYLILSS. He now has my JSX and I have the Snott Watt.....it's got gain....and a little more gain...and then some more. Good tones in this little box. I need low wattage amps for my use and this suits me well. I will do some preamp tube swapping i'm sure just to tweak some. High gain Ruby's in there now I think. It likes my bbe green screamer pretty well also. If it only had an effects loop...that's the only downer. Backing off the guitar volume and it cleans up well. Now I need to find some reverb/delay since that's about all I use. But need to try and find something that will sound decent in front of the amp. Any suggestions on reverbs and delay pedals? Heck, might just build an entire pedal board...why not....gas gas ga s gas gas gas

 

[OldSkoolNJ]

I should have mine in about 5 weeks

 

[sandman]

I should have mine in about 5 weeks

5 weeks is a long time when you have gas

 

[MYLILSS]

I wouldnt think it would be too terribly difficult to have an experienced amp tech like jerry at fja put an effects loop into it

 

[sandman]

I wouldnt think it would be too terribly difficult to have an experienced amp tech like jerry at fja put an effects loop into it

i'm going to see if i can find a delay i like that will go in front of the amp. I want a delay pedal anyway. If putting one in front of the amp doesn't work for me then i'll have a loop put in

 

[gtr31]

most of the clips i have heard of the tc flashback have been straight in front of the amp it sounds fine

 

[TheEternal]

I wouldnt think it would be too terribly difficult to have an experienced amp tech like jerry at fja put an effects loop into it

Or better, they guy who designed it

How much extra would it be to have a loop installed up front when ordering?

Also would it be a big deal to make the channels / modes foot switchable?

If not, how much for just the one button footswitch jack (no footswitch)?

Thanks!

 

[sandman]

Guy from Baron told me he'd have to take out the dummy load and line out to install an effects loop. We didn't talk prices. I'm gonna try out some pedals first. Want some pedals anyway.

 

[TheEternal]

Guy from Baron told me he'd have to take out the dummy load and line out to install an effects loop. We didn't talk prices. I'm gonna try out some pedals first. Want some pedals anyway.

That is because physically they can't both fit the amp foot print is too small for both.

What about a footswitch jack? Same thing? Too small?

 

[sandman]

Guy from Baron told me he'd have to take out the dummy load and line out to install an effects loop. We didn't talk prices. I'm gonna try out some pedals first. Want some pedals anyway.

That is because physically they can't both fit the amp foot print is too small for both.

i realize that. the snott watt is even smaller than my blackstar ht-5.

 

[TheEternal]

Guy from Baron told me he'd have to take out the dummy load and line out to install an effects loop. We didn't talk prices. I'm gonna try out some pedals first. Want some pedals anyway.

That is because physically they can't both fit the amp foot print is too small for both.

i realize that. the snott watt is even smaller than my blackstar ht-5.

Tell us what you think of it after a few days of messing with it..

 

[sandman]

Guy from Baron told me he'd have to take out the dummy load and line out to install an effects loop. We didn't talk prices. I'm gonna try out some pedals first. Want some pedals anyway.

That is because physically they can't both fit the amp foot print is too small for both.

i realize that. the snott watt is even smaller than my blackstar ht-5.

Tell us what you think of it after a few days of messing with it..

I do realize i'm in the honeymoon phase...but...so far so good !

 

[robertkoa]

Are there good cleans on the clean channel and can the classic setting do good classic Marshall Type 80s rock tones or similar ?

Thanks.