BE-100 effects loop compatible Multi effects processor?

  • Thread starter Thread starter BLUESSYNDICATE
  • Start date Start date
B

BLUESSYNDICATE

Member
Hi all;

I have the recommended Hardwire Delay and Reverb pedals on my pedal board for use in the Brown Eye's loop, and as advertised it's a big improvement over the muddy sound my Carbon Copy had been giving me.

Now I'd like a recommendation on a reasonably affordable multi effects pedal that would give me decent results for when I don't want to pull out the pedal board at home to just noodle around with...only require reverb and delay, but will take more if the recommended pedal has it....i.e. i'd rather have a great sounding pedal with just reverb and digital delay than have less decent sounding pedal that also had chorus or gain tones, etc...

Thanks for any insights!
 
I use the Eventide Timefactor - great pedal for reverbs & delays. I believe their new H9 pedal also includes some chorus & flange effects.

That's my 2 cents. Hope it helps
 
Thanks guys...I'm thinking about reverb and delay simultaneously...
 
Good question ... I plugged into my BE 100s loop for the first time today and initially had some trouble but then it seemed to straighten itself out. Is it cool to run pedals or is it expecting to see rack processors and only modern pedals that can handle very high voltages?

My delay is a very old Boss DD-3 that I got used in the early 90s.
 
I use a G-major II in the loop of my BE-100 and to get the best sound, I changed the level to consumer level. While it worked in pro level, it didn't sound "right".
As is well now.
 
You must log in or register to reply here.
Back
Top