Better Clips of my Cameron CCV Clone

  • Thread starter Thread starter scottosan
  • Start date Start date
scottosan

scottosan

Well-known member
Guitar by my friend Brian, who was playing a Tom Anderson Classic T (tele) with a Floyd Rose. The pickup with the M series which are mini humbuckers with single coil voicing. Brian likes his mids ;) So while maybe not ideal for the metalheads, the amp still got plenty nasty. Lots of different tones, so check them out



Channel 2 clips






Channel 2 demonstrating how well guitar cleans up and responds to the volume knob






Channel 1 Gain . Suprisingtone frrom the "Clean" channel

 
Awesome tones, and your friend rips on the guitar!
Very, very nice work on this, I'm envious as hell and never had a desire for a Cameron irregardless of all the Nonsense with the brand and Mark.
 
I'm really digging how the gain compresses on the leads. Sounds great overall. I'm digging the tone especially since I have a weird like for single coils and pickups like them. The M series through the amp still sound plenty mean.
 
Another great sounding build :rock:

So are those all in low power mode?
 
technomancer":39brakcv said:
Another great sounding build :rock:

So are those all in low power mode?
Click to expand...
we did switch to high power but I don't recall at what point
 
scottosan":1349xy1i said:
technomancer":1349xy1i said:
Another great sounding build :rock:

So are those all in low power mode?
Click to expand...
we did switch to high power but I don't recall at what point
Click to expand...

Cool sounds great either way
 
Sounds great, that gained up clean channel is really good.
 
That sounds killer !!!
For lack of better term it seems to have that sizzle that only certain amps do !!
I wish that Cameron was still building amps.
 
Got a set of Mercury Magnetic Transformers, chassis and an old school head shell. Getting ready to cook up a single channel version of this beast, but going to switch a few components to match some of the pre-prod units. This amp is too much fun :doh:
 
scottosan":clye6avo said:
Got a set of Mercury Magnetic Transformers, headshell and an old school head shell. Getting ready to cook up a single channel version of this beast, but going to switch a few components to match some of the pre-prod units. This amp is too much fun :doh:
Click to expand...

Sweet :rock:
 
scottosan":387s5atp said:
Got a set of Mercury Magnetic Transformers, chassis and an old school head shell. Getting ready to cook up a single channel version of this beast, but going to switch a few components to match some of the pre-prod units. This amp is too much fun :doh:
Click to expand...

Very curious to hear what you think when you built it, how much the difference between prod and preprod is. Only have experience with prod CCVs and yours sound VERY close. A little more open from the Clips, but that might also be something else in the signal chain like speakers, mics, ...
 
Alex_S":37qvej2v said:
scottosan":37qvej2v said:
Got a set of Mercury Magnetic Transformers, chassis and an old school head shell. Getting ready to cook up a single channel version of this beast, but going to switch a few components to match some of the pre-prod units. This amp is too much fun :doh:
Click to expand...

Very curious to hear what you think when you built it, how much the difference between prod and preprod is. Only have experience with prod CCVs and yours sound VERY close. A little more open from the Clips, but that might also be something else in the signal chain like speakers, mics, ...
Click to expand...
im also using a 3H choke vs a 10H. A 10H will sound a little more compressed. I am going to use a different choke, but honestly I am going to give up one trying to find an exact match. I've seen the insides of 3 pre prods and all were different. Also the the gain style stayed in the left, position, not the high gain position
 
sg guy":1d9mnjyk said:
psychodave":1d9mnjyk said:
Sounds great.
Click to expand...



-I'm still skeptical,... is the voicing of your's like this Dave?
Click to expand...
no, Daves is a pre production and those were all different build to build. Pretty much one offs. That being said, I can see an evolution of things that changed, so I am aiming for some of the things I saw in the earlier builds.

Also, daves clips Dave a maple board Charvel, Aldrich pickups, and G12H30 cab (I Believe). This was a rosewood board tele with single coil voiced minibuckers through a V30 2x12. But as I said above. The ones Mark built are all somewhat unique and trying mimic one exactly is a moving target. Rockinchippyhas 2 of Marks CCVs and says one is very Marshall and the other is like a Mesa/Soldano lovechild. That's the beauty of it. It's a great design with lots of tweakability
 
I love your build and clips. .Really wish you'd sell a few :) Eric
 
You must log in or register to reply here.
Back
Top