Bogner ecstasy 7 pin cable foot switch pin out/diagram

[mcgyver]

Hi, can anyone tell me where I can find a wiring diagram of the pin-out for a Bogner ecstasy foot switch.
I would like to build a cable for my Ground control/ GCX set up to switch the amp.

Also does Bogner sell the metal grill to replace amps with the wheat grill cloth?
If not, where can I find one?

Any help would be great.

Thank you in advance.

Jamie

 

[RockStarNick]

Pin 1: Standby
Pin 2: Boost 1
Pin 3: FX Loop
Pin 4: Channel 1
Pin 5: Boost 2
Pin 6: Channel 2
Pin 7: Channel 3

 

[mcgyver]

Thanks for your help Nick.
I have been searching the web for this and even on the Bogner forum here and from the forum on Bogner's site. I found a few links but they don't work.

Thanks again.
Jamie

 

[Anonymous]

I read (I think it was in the manual) that cloth and grill chassis aren't built the same, so you can't change cloth for metal or vice/versa

 

[RockStarNick]

Thanks for your help Nick.
I have been searching the web for this and even on the Bogner forum here and from the forum on Bogner's site. I found a few links but they don't work.

Thanks again.
Jamie

I copied the diagram from their old website, before they changed it... but you're right, it's nowhere to be found now.

 

[mmolteratx]

I read (I think it was in the manual) that cloth and grill chassis aren't built the same, so you can't change cloth for metal or vice/versa

That's odd. My metal grille 100B has what appears to be a standard chassis. I don't see why they would need separate chassis designs, and I'm pretty sure I've seen people swap headshells before. Anyways, it's moot seeing as how Bogner no longer offers the metal grille.

 

[SLOgriff]

Bogner NO LONGER has the metal grill. At this time they DO NOT have a supplier and there are no plans to have this in the near future.


There are NO different chasis with metal vs cloth. The ONLY difference is the actual headshell. If it came with "cloth" there is NO TOLEX on the edges where the front bolts onto. So, in previous years, if you bought a "metal grill" and replaced your stock "cloth grill"...you would see painted/bare wood under the metal grill(normally would all be tolex if it came original with metal grill) where it attaches to the sides of the front.

 

[Anonymous]

I'll just quote from the Bogner FAQ section (not saying it's impossible, just quoting)

"Ecstasy: Can I put a metal grill on my existing non-metal grill head?
No, each grill attaches differently."