BTM

  • Thread starter Thread starter duesentrieb
  • Start date Start date
duesentrieb

duesentrieb

Well-known member
The PCB of my Black Tiger arrived today - this way I can build some more than before - and with int. voltages.

Peter was so nice to give me his midi and mute technology, so that I can switch more sophisticated things - and add midi of course. I layouted the PCB this time myself, Peter did the QC
Three channels - of course.

Here are two pics, more when it is running with a clip or two or three . . .

BTM1.jpg



BTM2.jpg


BTM3.jpg
 
Damn, Olaf. Those preamps are really coming along nicely.
 
duesentrieb":2it47ipz said:
The PCB of my Black Tiger arrived today - this way I can build some more than before - and with int. voltages.

Peter was so nice to give me his midi and mute technology, so that I can switch more sophisticated things - and add midi of course. I layouted the PCB this time myself, Peter did just the QC
Three channels - of course.

Here are two pics, more when it is running with a clip or two or three . . .

BTM1.jpg



BTM2.jpg
Click to expand...
Awesome, Olaf! I'm in the midst of converting my re-designed amp to PCB, but I've got help - not going it alone. Still interested to hear your about your experience in doing this... It is clear this is the only way to produce my amp in quantity...

Look forward to hearing yours.

Steve
 
Thank you gentlemen :)

The first channel is a tweaked Shiva clean, the second a meaty crunch and the third has 5 firebreathing stages of gain :D
 
sah5150":3k66tv95 said:
Awesome, Olaf! I'm in the midst of converting my re-designed amp to PCB, but I've got help - not going it alone. Still interested to hear your about your experience in doing this... It is clear this is the only way to produce my amp in quantity...

Look forward to hearing yours.

Steve
Click to expand...
Hi Steve,

good luck.
Not that I'm an expert yet but lemme know if you need help or hints.
Parallel I'm also layouting a 100 Watter with the same specs.
 
moltenmetalburn":101bkvpk said:
How much?
Click to expand...
Manufacturing a proto PCB board (a single, just makes really sense with at least 10) is about 250 Euros :D

Lets wait and hear if it is "good" - and then we'll see further. The exchange rate isn't supporting a good price though atm.
 
Would you sell these as kits? They could be a good DIY project.
 
I don't think so, Tom, because not all of the "tech" inside is mine, you know.
 
Ah, I forgot about that little detail. :lol: :LOL: You doing a power amp to go with it?
 
You must log in or register to reply here.
Back
Top