Channel switch for Fish

[userd]

Hi,

what switch would you recommend for the fish?
I mean just one pedal with 4 buttons for each channel.

Right now I have two on/off switches,
but that means you have to step twice sometimes...

Thank you

 

[Tone Merchant]

the easiest and what i use is the rjm mini amp gizmo with a mastermind footswitch. Rjm makes a special cable for the fish. works great

 

[Shark Diver]

Suhr makes a Fish foot switch.

 

[userd]

the easiest and what i use is the rjm mini amp gizmo with a mastermind footswitch. Rjm makes a special cable for the fish. works great

Thank you.

And how would you use a Mesa 2:90?

Line in / instrument?
How do you set the master of the Fish when set to line in/instrument in?

I' m not sure how to set it up right now....

 

[Shark Diver]

Line in, not instrument. I'd run the Master on the fish around 3:00 o'clock.

 

[userd]

Line in, not instrument. I'd run the Master on the fish around 3:00 o'clock.

Isn't that basically the same to:

instrumenit/in and master Fish 10:00 o'clock?

And with your setting (3:00 o'), where do you run the channel volume (Strato for example) ?

Do you use deep and/or modern on the 2:90?
I thought with deep enganged this could be too much bass for a band mix...?


Thanks

 

[guitarslinger]

use a couple of the series loops in a TC 2290. now, it's midi controlled!