Axisman5150
New member
I had a V30 laying around after replacing it with a G12-65 to mix with a V30 in my Mesa 2x12 cab.(which sounds killer) So I decided to put the V30 in my Tourmaster 2x12 to see how well it mixes with a CL80. It's a keeper! Before the switch, I found the CL80's to be good in the mids but a little dull on the top end. With the V30 mixed in, now the cab has a nice top end and the CL80 & V30's mids go very well together. The Lows,Mids and Highs are just that much better. Much easier now to dial in the tone on both channels of my Renegade.
So if your thinking of changing out one of the CL80's, a Celestion V30 is a great option. Also, you CAN pull out the speaker just by removing the middle back plate. It's tight, but it'll come out. Just be careful!
So if your thinking of changing out one of the CL80's, a Celestion V30 is a great option. Also, you CAN pull out the speaker just by removing the middle back plate. It's tight, but it'll come out. Just be careful!
