Current " always running " pedals in stock

[MadAsAHatter]

I cannot. I just joined and imagine there must be a minimum number of posts before I can DM you.

You need 50 posts before you can DM or post in classifieds. Not sure, but you nay need to enable 2FA to DM as well. I know you need it to post in classifieds. It's a way to make sure you're a real person & not a bot or scammer. Shouldn't take you but a couple of days to reach that if you participate in the forums.

 

[pmillen]

Making post because of interest.. need 50 post before dms I think? Need to do a little more research, but maybe by the time I hit 50 post I'll be ready to pull the trigger

 

[griff10672]

Making post because of interest.. need 50 post before dms I think? Need to do a little more research, but maybe by the time I hit 50 post I'll be ready to pull the trigger

what are you looking to pull the trigger on ?

 

[skoora]

Wayne, you’d said you had done the Keely Compressor plus (4 knob) before, correct?

 

[pmillen]

what are you looking to pull the trigger on ?

Super drive

 

[griff10672]

Super drive

You might be interest in this ....

This is a Swiss Army Knife of a SuperDrive ..... it's my stock rendition of the SD-1 with two rotary pots ( Freq and Clip )

the Freq switch lets you tighten or broaden ( fatten or thin out ) the bandwidth of the clipping ... very useful for the guys that love the Sd-1 but have issues with Bass frequencies with certain amps or the guy that plays a Strat and wants the Sd-1 a little thicker ...

the middle position is stock ......you have two options below and above stock that will go thicker or thinner

The Clipping Switch changes the diode clipping type and configuration ... you have 5 options

stock silicon asymmetrical
silicon symmetrical
combo of transistor and LED in a asymmetrical setup
LED's in a symmetrical setup
a different type of silicon diode ( BAT42's ) in asymmtrical setup

 

[Music&Chaos]

You might be interest in this ....

This is a Swiss Army Knife of a SuperDrive ..... it's my stock rendition of the SD-1 with two rotary pots ( Freq and Clip )

the Freq switch lets you tighten or broaden ( fatten or thin out ) the bandwidth of the clipping ... very useful for the guys that love the Sd-1 but have issues with Bass frequencies with certain amps or the guy that plays a Strat and wants the Sd-1 a little thicker ...

the middle position is stock ......you have two options below and above stock that will go thicker or thinner

The Clipping Switch changes the diode clipping type and configuration ... you have 5 options

stock silicon asymmetrical
silicon symmetrical
combo of transistor and LED in a asymmetrical setup
LED's in a symmetrical setup
a different type of silicon diode ( BAT42's ) in asymmtrical setup

View attachment 415116

As an owner of this pedal, I can say, it is indeed "Super Doopah".