Dual amp rig (split) with GCX?

[ibanez4life SZ!]

Hey guys!

I have all the switching, pedal, etc. mapped out...ground loops taken care of two

Just wanted to ask...can I use the guitar out and feed thru split at the beginning of the GCX to effectively get signal to my two amps? Or will I be looking at impedance issues that will be messing with the tone of my heads?

Is there a better option? Or does this one work just fine it two heads in stereo is all I need?

Thanks!

Eric

 

[stephen sawall]

Can't wait to hear what they say about this.

 

[duesentrieb]

It has a buffer (OP amp) to drive more than 1 amp. So it should work.

If you should (then) run into ground loops, get a Palmer Splitter (PGA 03).
It is a splitter with built in iso transformer.
http://www.palmer-germany.com/85-1-pga03.html

 

[mixohoytian]

I'm about to do this as well
I was planning on not using the feed thru...
I was simply going to have loop 1 go to one amp
and loop 2 go to the other amp
2 loops used by amps instead of effects
is that the right idea?
( I don't want 1 or both on all the time...I want to switch between the 2 heads)

 

[ibanez4life SZ!]

^The only problem with that setup us that you need a Y-cable if you want to run both amps at the same time...that seems be be where you run into tone loss.

Eric

 

[animusofabbas]

Im putting a dual rig together myself with a gcx. voodoo witch doctor and a triaxis with a strategy. Quick question what cables you using for wiring up you monster there? Can you recomend any high quality ones that dont involve me burning my house down soldering and things lol.

 

[mixohoytian]

^The only problem with that setup us that you need a Y-cable if you want to run both amps at the same time...that seems be be where you run into tone loss.

Eric

I only want 1 amp or the other, no mixing
does that mean I will avoid ground loop issues as well?