 
 
		
				
			scottosan
Well-known member
So, the fair warning may be truly offset with same guage wire. I contend that the early JB it was based off of "may have" just used 2 different guage wires of similar wind counts. Meaning, I could wind a pickup with ~6800 winds of 44awg on one bobbin and ~6200 winds of 44awg on the other ang get a similar DCR as 6800 winds of 44awg and 6800 winds of 43awg. They're have similar DCR but the later would have a higher inductance.  They would have different DCR per coil but same wind count.  Just eyeballing the published inductance specs from the DP website, I suspect that using the underwound first option would yield too low of  inductance to match the DP specs.
That said, your never going to get an exact clone of a machine wound pickup by hand winding and many great pickup were results of happy accidents or non traditional specs.
The fact that I left the Jalens in my Chubtone speaks volumes for my respect for Greg
				
			That said, your never going to get an exact clone of a machine wound pickup by hand winding and many great pickup were results of happy accidents or non traditional specs.
The fact that I left the Jalens in my Chubtone speaks volumes for my respect for Greg
			
				Last edited: 
			
		
	
								
								
									
	
								
							
							 
 
		 
 
		 
 
		 
 
		 
 
		 
 
		 
 
		 
 
		 
 
		