phillybhatesme
Well-known member
Reverb: 1044
RT: 850
Click here for all pictures
The guitar is in great condition overall. No blemishes on the horns and the purple sparkle metallic is shiny and beautiful. There is a small crack in the finish on the underside of the neck (treble side), which I've pictured. You have to angle the guitar into the light in order for it to appear as drastic as it does in the picture.
The guitar plays and sounds great. It was just recently restrung with 10-46s and the fretboard was oiled during the string change. Please go through all of the pictures and watch the YouTube video of the exact guitar being played. I love making these demos and even though I'm not going directly into an interface, the demo shows some of the basic guitar functionalities.
Epiphone Flying V hard case included.
Specs:
Fingerboard Material: Indian Laurel
Fingerboard Radius: 304.8mm / 12.0in
Fret Count: 22
Frets: Medium Jumbo
Inlays: Mother of Pearl Dot
Joint: Glued In, Set Neck
Neck Material: One-piece Mahogany
Nut Material: Graph Tech
Nut Width: 43.0mm / 1.69in
Profile: Rounded C with Volute
Scale Length: 628.65mm / 24.75in
Bridge Pickup: Gibson USA Calibrated T-Type
Controls: 2 Volume, Master Tone, CTS Potentiometers, Orange Drop Capacitor
Neck Pickup: Gibson USA Calibrated T-Type Humbucker
Output Jack: Switchcraft 1/4"
Pickup Selector: Switchcraft 3-way Toggle
Bridge: Custom Bridge
Control Knobs: Black Speed
Finish: Nickel (Except for Strap Buttons)
Jack Plate Cover: Black Toggle Washer (No Text)
Mounting Rings: Black
Pickguard: White 70s Flying V, 3-ply
Pickup Covers: None
Strap Buttons: 2 - Neck Heel and End of Upper Wing (Black)
Switch Tip: Ivory
Tailpiece: LockTone Stop Bar
Truss Rod: Dual Action
Truss Rod Cover: White 70s Flying V, 3-ply, with Epiphone Logo in Gold Hotstamp
Tuner Plating: Nickel
Tuning Machines: Grover Rotomatic with Spade Button
RT: 850
Click here for all pictures
The guitar is in great condition overall. No blemishes on the horns and the purple sparkle metallic is shiny and beautiful. There is a small crack in the finish on the underside of the neck (treble side), which I've pictured. You have to angle the guitar into the light in order for it to appear as drastic as it does in the picture.
The guitar plays and sounds great. It was just recently restrung with 10-46s and the fretboard was oiled during the string change. Please go through all of the pictures and watch the YouTube video of the exact guitar being played. I love making these demos and even though I'm not going directly into an interface, the demo shows some of the basic guitar functionalities.
Epiphone Flying V hard case included.
Specs:
Fingerboard Material: Indian Laurel
Fingerboard Radius: 304.8mm / 12.0in
Fret Count: 22
Frets: Medium Jumbo
Inlays: Mother of Pearl Dot
Joint: Glued In, Set Neck
Neck Material: One-piece Mahogany
Nut Material: Graph Tech
Nut Width: 43.0mm / 1.69in
Profile: Rounded C with Volute
Scale Length: 628.65mm / 24.75in
Bridge Pickup: Gibson USA Calibrated T-Type
Controls: 2 Volume, Master Tone, CTS Potentiometers, Orange Drop Capacitor
Neck Pickup: Gibson USA Calibrated T-Type Humbucker
Output Jack: Switchcraft 1/4"
Pickup Selector: Switchcraft 3-way Toggle
Bridge: Custom Bridge
Control Knobs: Black Speed
Finish: Nickel (Except for Strap Buttons)
Jack Plate Cover: Black Toggle Washer (No Text)
Mounting Rings: Black
Pickguard: White 70s Flying V, 3-ply
Pickup Covers: None
Strap Buttons: 2 - Neck Heel and End of Upper Wing (Black)
Switch Tip: Ivory
Tailpiece: LockTone Stop Bar
Truss Rod: Dual Action
Truss Rod Cover: White 70s Flying V, 3-ply, with Epiphone Logo in Gold Hotstamp
Tuner Plating: Nickel
Tuning Machines: Grover Rotomatic with Spade Button
