EVH D-Tuna question

[Briman24]

Does anyone know where i can buy the little tiny screw from d-tuna? I lost mine somehow from one of my guitars. I have know idea where I could buy one if possible?
The thing still works but I have to use the floyd fine tuner to tune e and push down as I slide it in and out so it doesn't scrape and catch on the floyd fine tuner.

 

[squealie]

It's an alan set-screw. Not uncommon. Just need the size and thread spacing.

And I just looked through 3 of my D-tuna kits... sucks that they don't give you a spare. I would have sent it to you.

https://www.fu-tone.com/product/evh-d-tuna-fine-tuning-screw/

 

[Stradazone]

maybe try Adam at Fu-tone? tell him to send me one too

 

[Briman24]

It's an alan set-screw. Not uncommon. Just need the size and thread spacing.

And I just looked through 3 of my D-tuna kits... sucks that they don't give you a spare. I would have sent it to you.

https://www.fu-tone.com/product/evh-d-tuna-fine-tuning-screw/

Awesome! Thanks a lot!

 

[coffeedrinker71]

If you could learn the size of that set screw, I bet this shop on eBay would have it. They have a ton of guitar related screws.

https://www.ebay.com/str/MonsterBolts

 

[Samhain]

d-tuna only works if you put a stop-block in the spring cavity otherwise it will never really stay in pitch from A440 to drop D. Least thats my experience.

 

[coffeedrinker71]

d-tuna only works if you put a stop-block in the spring cavity otherwise it will never really stay in pitch from A440 to drop D. Least thats my experience.

That's been my experience too.

 

[Briman24]

d-tuna only works if you put a stop-block in the spring cavity otherwise it will never really stay in pitch from A440 to drop D. Least thats my experience.

Yes that is right. I have never had a problem with tuning with them. I just lose screws lol