footswitch

[jerrydyer]

A while ago there were a couple guys who had footswitches with their old CCV's that didnt work right. if there are still a couple out there not doing the leds correctly, I have a pic I can post tonight or first thing am. its an easy conversion to get it working with the 24 volt relay system.

 

[232cap]

Jeyy with my old CCV all I had to do was drop the resistor value inside the footswitch so the relay in the amp had enough voltage to switch state. The leds and the channels switched fine after that.

 

[jerrydyer]

ok thats good. but there wer two or three guys with old CCV's who still needed footswitches that worked right. I cant remember who though. Im going to put it up tomorrow just in case. its an easy fix.

 

[jerrydyer]

if you rewire both switches like this, your leds and channel switch will work right.
this is for the older ccv's a couple guys said their footswitches did not work right.

 

[jmgman69]

What value is the resistor? I'm red/green color blind

It must be small... like 10 ohms? Also, what voltage LED's are you using?

Me too,sucks just for that shit alone

 

[steve_k]

What value is the resistor? I'm red/green color blind

It must be small... like 10 ohms? Also, what voltage LED's are you using?

Yeah Dave.......when did you start playing that blue Les Paul

 

[jerrydyer]

sorry.. this is the standard marshall replacement two led two button footswitch. there were two or three guys wanting to know how to rewire it to make it work for the old ccv'. if you wire it like this and then the other one is flip flopped. I can find out the res value when I get home. It is going to be very low 220 ohm and very low leds value.

 

[jerrydyer]

 

[Schaf]

What value is the resistor? I'm red/green color blind

It must be small... like 10 ohms? Also, what voltage LED's are you using?

Yeah Dave.......when did you start playing that blue Les Paul

There have been quite a few time where I think my shirt is grey and it is green

I have trouble with grey and green. My wife makes fun of me all the time.

 

[232cap]

I think I had a 5.6k on my switches. Stock led's