moltenmetalburn
Active member
psychodave":97nampiv said:
For what issue?
We have different version numbers correct? and both had the ground loop issue.
Did Fortin admit this may be a problem with the pedal?
For what issue?
We have different version numbers correct? and both had the ground loop issue.
Did Fortin admit this may be a problem with the pedal?
jc986
Member
moltenmetalburn":1f8j1a8d said:
What version is your Zuul? Mine is 9.18a and I’ve not had an issue with ground loops.
LCW
Active member
Has anyone tried one of these? It's actually 2 gates in 1....
moltenmetalburn
Active member
jc986":312p8ol1 said:
I forget exactly. 3.something. From the second run as mine from the first run shipped with a crackling issue. An early one. Maybe the same as daves.
psychodave
Well-known member
moltenmetalburn":3f1krhs3 said:
Mine is 3.17
LCW
Active member
I'm guessing those "version" #'s are 'month.year'
moltenmetalburn
Active member
psychodave":8440gh7p said:
Found my PCB picture, mine is 3.17a.
This is starting to seem like a design flaw potentially. Wodner if they’ll say its too old or blame it on me again. I want to swap this out for a new revision and see if that helps any.
stratjacket
Well-known member
LCW":nw5y0fn7 said:
holy sheep shit batman !! I did not know this was out. Big Airis Savage Drive fan, I will definitely check it out and be purchasing one of these.
moltenmetalburn
Active member
stratjacket":3du3vdzd said:
Edit:
This looks cool as it turns out Robert Keeley designed it.
LCW
Active member
errrrrl
Well-known member
*googles Hades Gate*LCW":cypf87rw said:
psychodave
Well-known member
I will honestly say that now that I found a work around for the Zuul, it’s really good in the loop of my amp. I need to box it up and ship it back this week.
errrrrl
Well-known member
So whats the work around? Did I miss that?
psychodave
Well-known member
errrrrl":r3o339xe said:
Removing the ground from the cable I use going to the key input.
errrrrl
Well-known member
psychodave":1qpd538k said:
LCW
Active member
Now there’s a ZUUL Mini
moltenmetalburn
Active member
LCW":1s4hcxck said:
WTF thats says 9-12V in the copy.
When I got my first zuul someone here posted that they had a proto and that they used 12V for more headroom. I decided to ask fortin before trying with my non proto.
I was told I had no idea what I was talking about that the zuul could never take that voltage and I felt they were insinuating I was foolish as the pedal was “also silkscreened 9volts.” It was also clear Fortin was not the one answering the emails.
Behind the scenes this RT individual shared with me the text messages from Fortin where he explains the unit can take 12v but he doesn’t want people doing that cause they were blowing up grinds with 12.
Therefore they chose to lie to me instead.
I tried it anyway, the 12V has always worked sans issue and with a tad more headroom which I find important in the fx loop.
In fact up to 15 should but I will NOT and do NOT suggest anyone uses anything but 9v without fortin approval to cover my ass and prefent you from burning up your pedal.