G-System Pedal Calibration difference between Rack and Ctrl?

[Plattfuss]

Perhaps there are still some G-System Users out there who could help me?

I'm using a G-System and Expression Pedals. Normaly the Control-Unit and the Rack-Unit were screwed togther.
Now i put the Rack-Unit in a Rack for Stage and go with one Networkcable to the Control-Unit.
So i connected now for the first time my Pedals to the Control-Unit input and calibrate them.
The strange thing is, that the Calibration-Values connected to the Rack-Unit are Between 0 and 50 but
conntected to the Control-Unit they go to the half (0 to 23).
I tried different Networkcable without changes.

Does Someone had have same experience?
I mean it stil works ok but i imagine it works a little bit smoother with a higher value range...

 

[guitarbilly74]

That's low. Even 0-50 is low. I have mine connected to the controller and get a 0-89 range.

What expression pedal are you using? Despite of what the TC manual says, you need a high impedance pedal with a 250k pot to get a proper range.