gettin inside the vh4

[thetubescreamer]

hi can anyone help instruct me as to how i remove the casing in the vh4. peter sent me a bridge rectifier and i want to install it. i have an idea how i might be able to do it but not sure what tools i need

 

[MARK2C]

Remove the four large screws from the bottom of the head shell and remove the five phillips head screws from the back
panel. The chassis will slide right out.

 

[thetubescreamer]

cheers i got it tho all it needed was a good pull. now to solder some wires to the rectifier and ill be good as new(hopefully)

 

[MARK2C]

Pull the wires off one at a time and place them on the new one. This way it does not get wired wrong.
This is for the tube heaters I take it ?

 

[FourT6and2]

Should you really be tinkering inside an amp when you had to ask on a forum how to remove the chassis from the headshell? Good luck!