Getting a DI signal

[Markmetalguitar]

Set up: EVH head into Captor X into Black Lion Revolution 2x2 interface. DAW: Presonus Studio One Professional 5.
Loving the tones coming from the amp and Two Notes IR’s for recording. But: I cannot figure out to have the “wet” signal and straight/clean DI track to separate. I call up an IR, use the Left out and bypass the Right within the Two Notes. Arm both tracks (one wet, one for DI) but BOTH tracks are receiving the “wet”. I’m not sure if my routing is incorrect within my DAW, or Captor X??? If anyone can assist it would be greatly appreciated. Thanks in advance!

 

[Jason Wilding]

Hey, have you set the Captor X to "Wet/Dry mode?

This may help!

https://wiki.two-notes.com/doku.php...torpedo_captor_x_user_s_manual#output_routing

 

[Markmetalguitar]

Hey, have you set the Captor X to "Wet/Dry mode?

This may help!

https://wiki.two-notes.com/doku.php...torpedo_captor_x_user_s_manual#output_routing

I have indeed. In theory the track intended for DI should be a straight dry signal and it still comes through as “wet”. I’m almost thinking it’s something in the Black Lion interface I/O routing ??

 

[RossJohnDavies]

Hey Mark,

Good to hear from you! It might be best if you speak to one of our specialists and I am sure they will get you all up and running in no time!
Please contact our help desk here: https://support.two-notes.com/

 

[Markmetalguitar]

Hey Mark,

Good to hear from you! It might be best if you speak to one of our specialists and I am sure they will get you all up and running in no time!
Please contact our help desk here: https://support.two-notes.com/

Hey Ross you guys are the best and I did receive your DM. It seems like it’s more of an interface routing so I’m going to look into that and then follow your suggestions. Thanks so much!

 

[RossJohnDavies]

Hey Mark, No worries, let me know how you get on!