HELP PLEASE!!! FUSES FOR EINSTEIN!!!

[Metalhead]

I would greatly appreciate it if someone with a Diezel Einstein could tell me what type of fuses I should use for the 2 main fuses (just under where the power cable plugs in)? It keeps popping them when I use the 250 volt 1/2 milliamp slow blow fuses, which I thought were the correct ones. Am I using the wrong ones??? I think I must be because everything else seems to be in order. 911 HELP, I'VE GOTTA GET THIS FIXED FOR MY BUDDY!!!!

 

[CaseyCor]

Re-post this in the Deizel section. Might get a faster reply there.

 

[Metalhead]

OK, stupid internet!!! I posted it 3 times on accident!

 

[CaseyCor]

OK, stupid internet!!! I posted it 3 times on accident!

I see that Should be able to delete them. Bottom right hand corner of the post.

 

[jasonP]

figure out why the amp blows the fuse in the first place... most likely a power tube.

Always replace fuse with same rating and type. Never go above what the amp is rated for otherwise you will fuck shit up.

 

[nbarts]

pull the power tubes out, replace the fuse. if it doesn't blow again, replace with a n set of power tubes

 

[nbarts]

there is only 1 main fuse, the other one is a spare.

 

[nbarts]

1/2 250 is for power tube pairs, not for main.