Klauth
Active member
Yeah...it's very jenky as far as getting a solid message of their gear.
Klauth
Active member
I drove 1,500 miles to pick up a Mesa powerhouse 4x10, and it was PERFECT! I don't trust shippers these days.
FourT6and2
Well-known member
FourT6and2
Well-known member
Where did you buy the Hiwatt cab? I want one to match my Super-Hi (they have a matching Super-Hi cab or the regular 4x12). But 1) holy crap... $2,500 for a speaker cab is insane an 2) nobody actually sells them in the US that I can find.
Klauth
Active member
I bought all my HIWATT gear through their site. takes about a month. I chose the purple back speakers for their musicality. I'm gunna buy 2 more 4x12's and put a set of the new FANE Crescendo's in one of them so I have the full offering for my studio. probably pick up a DR88 as well. there is ALOT of interest in HIWATT but nowhere to go to audition everything all at once so, I went all in to offer it to clients. even some Hi-Tone gear as well for comparison.
FourT6and2
Well-known member
Do the cabs ship from the UK or Canada?
The problem with taking a gamble on the Super-Hi cab is if I don't like it, nobody is every going to buy it because of the non-traditional format (2x12 + 1x15). So it's less of a gamble to get the 4x12. Also not sure how porting will sound with a high-gain amp like this.
Hiwatts-n-Gibsons
Well-known member
Well, if you ever decide you want to buy a '72 Hiwatt 4x12, then I'm your guy.
Klauth
Active member
EVERYTHING...comes from canada.... from what Ive learned, the amps are started in UK and finished in canada. I think that's where their wood shop and final assembly is.
Cool711
Member
So what’s up with the difference between the Custom Super Hi 50 and the Super Hi 50?
The latter has the boost and depth control, and is cheaper.
Some info I’ve found says it’s because it’s now PCB.
My questions is, is the gain the same between them?
The latter has the boost and depth control, and is cheaper.
Some info I’ve found says it’s because it’s now PCB.
My questions is, is the gain the same between them?
Klauth
Active member
... No.
FourT6and2
Well-known member
The Custom is built in the custom shop and is hand-wired. The other one is PCB, presumably made in China, and has a channel switch on the back, along with a pseudo depth control. This control switches a cap in the post-presence filter in the NFB loop, which bypasses more or less NFB leading to sort of a low-end boost. It's not a traditional depth control like you might find on a Marshall mod. The result is a wider "girth" to the amp and more low-end thump. But the compromise is you loose presence control functionality. Not a huge deal though because you can still get plenty of high end from the tone controls.
I have two Custom Super-Hi 50s. One with these changes and one without. They both sound good for different reasons.
No idea how the new PCB version sounds. I don't think anybody has one.
Similar threads
