I'll Show You Mine IF You Show Me Yours(Carvin) Videos Added

[Brandon Breeze]

I don't have a bunch of Carvin stuff, but I do like it, a lot!

Here's my V3 combo running through a V3 cabinet with Celestion G12T-75's with heavy riffs,mounds damn good. I change between channel 1&2 here. Channel 1 is chunky and less distorted, channel too is more creamy and lots of distortion. 2:00 is when I switch from 1 to 2

With Tubescreamer through bothe v3 & Vai legacy Carvin cabs

My Carvin 3/4 stack, V30's in the combo & G12T-75's in the cab

My built from scratch for me Carvin DC727 Seven String

Mahogany neck through body tung oil finished Birdseye maple fret board super jumbo frets abalone dot inlays sperzel locking tuners abalone Carvin logo, mahogany body, hand picked quilted maple top, headstock matched(stain & quilt top), deep triple step blue stain burst, active/passive electronics, string saver saddles, strap locks

Vai Legacy Cabinet, tons of bottom end chunk, very tight and focused. V30's

 

[jsp]

 

[Brandon Breeze]

That's gotta be one of the best looking bolt Ons I've ever seen

 

[SFW]

This was my DC127C. I so regret selling this guitar.

 

[Alex Stanley]

I was/am looking for a cabinet for a Soldano head. The Carvin stuff seems very reasonable, price wise.

 

[Brandon Breeze]

This was my DC127C. I so regret selling this guitar.

Shes a beauty. I too made the mistake of selling a Carvin, my old DC727. Won't be doing that again.

I was/am looking for a cabinet for a Soldano head. The Carvin stuff seems very reasonable, price wise.

Especially in the used market. I bought my carvin 4x12 for next to nothing. They're solid plywood, made in the usa and have good speaker selection. I recommend Carvin to everyone regardless of taste. The Carvin cabs are all front loaded I believe. Some people prefer rear loaded, so keep that in mind.

 

[Atropos_Project]

Extended scale 5 string. Odds are pretty high that my next axe will be built by them as well.

 

[Brandon Breeze]

Extended scale 5 string. Odds are pretty high that my next axe will be built by them as well.

 

[gweb6969]

My current Carvin collection.

 

[metalmaniac93]

One of my favorite Axes!!! Used to own a few Carvins, but this one was it!!

 

[shredi knight]

Drool Bitches!

 

[sandman]

Drool Bitches!

specs??? that's beautiful

 

[shredi knight]

specs??? that's beautiful

Thanks.



Carvin DC600C:

- Floyd Rose Tremolo
- Maple Neck/Alder Body (Standard)
- Bookmatched 4A Quilted Maple Top (Picture Matched- Option 50)
- Deep Aquaburst
- Clear Gloss Finish (Standard)
- Rear of Body Natural Clear
- Tung Oil Finish Back Of Neck (Natural Wood)
- 6-String Pointed Headstock Reverse 3+3
- Quilted Maple Headstock Matches Body Finish
- Ebony Fingerboard (Standard)
- Dot Inlays (Standard)
- Stainless Steel Jumbo Frets .055" H .110" W
- 14in Fretboard Radius (Standard)
- Tone Control Doubles As A Push-Pull Coil Splitter (Standard)
- Use Customer's Pickups - DiMarzio D-Sonic (Bridge), DiMarzio Air Norton (Neck) - Option 50
- 3-way Toggle Pickup Selector Switch In Place Of Standard Blade-Style Switch -Option 50
- Black Hardware
- Drop Shadow Logo White on Black
- Dunlop Straplocks

 

[sandman]

nice

 

[bwgintegra]

That thing is badass, care to share the model and specs?

 

[JerEvil]

That's gotta be one of the best looking bolt Ons I've ever seen

Right??? Holy gorgeous Batman!

 

[Shask]

That's gotta be one of the best looking bolt Ons I've ever seen

I gotta agree!

 

[yankeebulldog]

Bolt Plus Kit


Icon Bass

 

[jsp]

http://i.imgur.com/UXQcucY.jpg

That thing is badass, care to share the model and specs?

Thanks, dude. It's a Contour 66, 1-piece swamp ash body with a claro walnut top, tung-oil finish, mahog/maple 5 piece neck, ebony board, stainless medium-jumbo frets.

 

[Brandon Breeze]

That's it?