Installing a Sustainer in my Charvel

  • Thread starter Thread starter ghosty999
  • Start date Start date
ghosty999

ghosty999

Well-known member
oqkrbl.jpg


This is my design idea, I have the guitar and sustainer and ready to get installed. Anyone see any flaws or cons in my design idea?

I don't want to drill through the body.

Also anyone had experience with the sustainer?
 
I have a PC-1 with the Sustainer in it and it's pretty cool
 
I have a Jackson Dinky with one. it has an on/off switch and three different types of sustain, and is adjustable with a knob, and has internal adjustments too. It's a lot of fun to use. It's a sustainiac I think. It's the black Jackson on the left. I took the volume knob off because I kept hitting it. Did yours come with different options or just on/off and control?
 
I have a sustainer in a Fernandes, which is why I bought it. They are fun, especially doing all of the Vai tunes that have them. If you are doing the install yourself, you will still have to route the body, the circuit board is probably two inches squared and then you have to account for the battery compartment as well.
 
HilltopExplosion":21c2q1rr said:
I have a Jackson Dinky with one. it has an on/off switch and three different types of sustain, and is adjustable with a knob, and has internal adjustments too. It's a lot of fun to use. It's a sustainiac I think. It's the black Jackson on the left. I took the volume knob off because I kept hitting it. Did yours come with different options or just on/off and control?

It's the FKS-101 so just has the 2 switches. I will be routing myself but going to try keep most of the parts under the pick guitar and cut around in there as opposed to a whole new section. But will have to cut the battery compartment at the back.

I think switch one is on and off, and switch two is the types of sustain like you said :rock:

300421000001000-00-500x500.jpg
 
Hey Callum , when do we get some new vids of original music ?
 
Back
Top