just a bit of advice on fuses and tubes please

[villager]

hi all, just a bit of advice needed,

switched my einstein from standby to on and bang, blown inner tubes fuse and blown main fuse, should i replace all the power tubes or just the inner 2, and as i now have all 6550 can i replace the inner 2 with el34?

also any idea how to get the shattered pieces of the inner glass fuse out of the fuse holder?

thanks

 

[Peter Diezel]

I would replace the fuses and all tubes
into EL34BHT. Don´t forget rebiasing.

 

[villager]

thanks peter, I will do that

 

[duesentrieb]

see PDF, Mark

BHT tubes are available in europe via
http://www.banzaieffects.com

http://www.banzaimusic.com/Ruby-Tubes-EL34BHT.html

 

[villager]

thanks olaf, I found the pdf , will do that

markf

 

[duesentrieb]

Let me know if you have any further questions, Mark.

 

[villager]

will do thanks

markf

 

[villager]

thank you for the time and help olaf and peter, all good now, I had some new 6l6 hanging round so i tried those until i get some el34's

very different from the 6550's which were in before..

markf