SilentUnderground
New member
No Longer Available
ACShreds
New member
Steinmetzify
Well-known member
Holy shit! The Drag The Waters profile is the closest I've ever heard.......awesome work.
SilentUnderground
New member
How did you get the Videos to embed ACShreds??
university81
Active member
sounds awesome,
what's the amp you profiled or setup for the metallica load/reload tones in the vid? or 2:30 - around 3minutes , i think it's that era metallica unless my memories are wrong lol
what's the amp you profiled or setup for the metallica load/reload tones in the vid? or 2:30 - around 3minutes , i think it's that era metallica unless my memories are wrong lol
SilentUnderground
New member
Everything was done through my Orange Rockerverb MKII 50 Watt head and Blackstar 4x12" with Vintage 30's
EQ and Boost pedals were used to shape the Front End / Reaction of the Rockerverb's preamp gain to get me as close to the Sound / Feel as possible
Then a Frequency analyser was used to compare the Rockerverb to the Originals.
Then ALOT of EQ curtesy of 2 x 31-Band DBX EQ's was used on the line back to the Kemper so the Profiles could be made.
EQ and Boost pedals were used to shape the Front End / Reaction of the Rockerverb's preamp gain to get me as close to the Sound / Feel as possible
Then a Frequency analyser was used to compare the Rockerverb to the Originals.
Then ALOT of EQ curtesy of 2 x 31-Band DBX EQ's was used on the line back to the Kemper so the Profiles could be made.
The Hoff
Active member
Not too bad 
Playing was fantastic.
Playing was fantastic.
SilentUnderground
New member
Thanks Hoff
I do okay for a Drummer - Just dont ask me to do the Solos
I do okay for a Drummer - Just dont ask me to do the Solos
Juggernaut
Well-known member
Clicked your link, page links were blinking, and acting wierd, got off the page explorer started acting wierd, pages on RT weren't loading. Shut down and restarted computer, all IDs and passwords were all reset so I needed to login again..... WTF???
SilentUnderground
New member
^^^
Really?? Aint never heard of that happening on the site before!!
The links light up and underline when you hover over them.
As for the rest... Probably from using explorer
Really?? Aint never heard of that happening on the site before!!
The links light up and underline when you hover over them.
As for the rest... Probably from using explorer
university81
Active member
SilentUnderground":kz2ymxc7 said:
for the youtube embed say your youtube video is this:
https://www.youtube.com/watch?v=OBmM79YadYM
take out the
https://www.youtube.com/watch?v=OBmM79YadYM
then put that bit ie:
OBmM79YadYM
between the Youtube /Youtube tags and presto:
SilentUnderground
New member
^^^ You're a Legend Sir - Many thanks ^^^
university81
Active member
SilentUnderground":24doz4z2 said:
no problem =0
what you using to record your videos btw?
I'm looking for some kind of webcam solution to record some vids but not sure what to get,
SilentUnderground
New member
Its a Logitech C910??
It can shoot at 1080p but only at 14fps -
at 720p it can shoot at 24 fps -
Stereo Mics on it and the Software is pretty good.
I basically Gaffa Taped mine to an old TAMA Boom Cymbal Stand and put an extension USB cord on it to move it around a bit better for the Shots!!
It can shoot at 1080p but only at 14fps -
at 720p it can shoot at 24 fps -
Stereo Mics on it and the Software is pretty good.
I basically Gaffa Taped mine to an old TAMA Boom Cymbal Stand and put an extension USB cord on it to move it around a bit better for the Shots!!
university81
Active member
SilentUnderground":3ntb9p3q said:Its a Logitech C910??
It can shoot at 1080p but only at 14fps -
at 720p it can shoot at 24 fps -
Stereo Mics on it and the Software is pretty good.
I basically Gaffa Taped mine to an old TAMA Boom Cymbal Stand and put an extension USB cord on it to move it around a bit better for the Shots!!
ah cool, yeah that's kinda what i'm looking for, don't need HD , 720p is more than enough, sound will be done separately anyhow, it's do a few simple vids or if i want to flog some gear (which is always inevitable lol)
thanks
fluff191
Active member
Wow so I am readying to buy my Kemper and didnt know you can load the profile of just the cabinet (I havent read the manual yet either).
I am looking through your videos and I can download your cab profiles and try them with my Profiled amps???
I am looking through your videos and I can download your cab profiles and try them with my Profiled amps???
SilentUnderground
New member
For Sure!!
You can change FX Blocks - Cabs - Amps the whole lot.
For example my Pantera Profiles contain -
The Amp Block - The "After Profiled" EQ Block - the Cabinet Block - and an EQ FX Block (I use this to fine tune the Profile to be as close as possible to the Original sound)
You could essentially put the Vulgar Display of Power Amp - with the Southern Tread Kill Cabinet - with the EQ block of CowBoys From Hell.
You can even introduce Pre-Amp gain into a 100% Clean amp
What would a Screaming Roland Jazz-Chorus sound like with Mesa Rectifier amounts of gain ???
And Vise Versa...
You can make the Fully Dimed channel of the Vulgar Display of Power amp 100% Crystal Clean!!
you can MIDI sweep the Gain of the profile from Crystal Clean to INSANE gain and never even need more than 2 profiles cause it has volume compensation so as the gain goes down the volume goes up!!
I'm sure you get the point
You can change FX Blocks - Cabs - Amps the whole lot.
For example my Pantera Profiles contain -
The Amp Block - The "After Profiled" EQ Block - the Cabinet Block - and an EQ FX Block (I use this to fine tune the Profile to be as close as possible to the Original sound)
You could essentially put the Vulgar Display of Power Amp - with the Southern Tread Kill Cabinet - with the EQ block of CowBoys From Hell.
You can even introduce Pre-Amp gain into a 100% Clean amp
What would a Screaming Roland Jazz-Chorus sound like with Mesa Rectifier amounts of gain ???
And Vise Versa...
You can make the Fully Dimed channel of the Vulgar Display of Power amp 100% Crystal Clean!!
you can MIDI sweep the Gain of the profile from Crystal Clean to INSANE gain and never even need more than 2 profiles cause it has volume compensation so as the gain goes down the volume goes up!!
I'm sure you get the point
Juggernaut
Well-known member
SilentUnderground":39vpxjsn said:^^^
Really?? Aint never heard of that happening on the site before!!
The links light up and underline when you hover over them.
As for the rest... Probably from using explorer
working fine now.... hmm. oh well. Thanks a bunch I'll have to load em up and check em out tonight
FYI, the Randall cabs are linked the same 2x15 zip, is that the way it supposed to be?
Thanks again!!!!
SilentUnderground
New member
Glad there was no problems.
Oh shit, Thanks for reminding me !!
I was meant to fix that up yesterday - I pulled em back off the Kemper to Re-Upload but forgot about it.
Cheers,
Oh shit, Thanks for reminding me !!
I was meant to fix that up yesterday - I pulled em back off the Kemper to Re-Upload but forgot about it.
Cheers,
SilentUnderground
New member
The Randall WARHEAD 4x12 Cabinet is fixed up now - In case anyone was trying to get it!!
Cheers -
Cheers -