Let's see your cheap axe that rivals your expensive ones

  • Thread starter Thread starter Meathead
  • Start date Start date
dstroud":3vuh01xh said:
Randy Van Sykes":3vuh01xh said:
dstroud":3vuh01xh said:
Randy Van Sykes":3vuh01xh said:
dstroud":3vuh01xh said:
I only have cheap guitars - expensive ones don't feel that different to me, so I just buy cheap and spend more $$$$ on amps :D ! Anyway, here's my clan of Rondo's and Squiers - I don't think I spent more than $200 on any of them except the floyded Rondo - I had to put a Gotoh floyd on it, so that cost me a little more (about $300 by the time I was done)...
That's awesome!
The more expensive guitars come from the factory setup well...frets all dressed nice.
With something like a Squier or an Epiphone, in the store they play like crap...but they just need some adjusting. They can become just as good a player for 1/10th the cost.

Actually most of the Squiers and Epiphones are crap period...just have to wade through them. :D

yup, wade throug 'em - I can usually find one I don't have to pay for a setup - that's when it's a real good deal! And the darn things are so cheap, it's hard not to buy one when it's sitting there for $100 and it plays good! Of course I usually put in a new bridge pickup, but I've found some killer pickups at Guitarfetish for real cheap :) .
Do tell which pickups are killer at Guitarfetish?
Interesting, I had some of their pickups bookmarked...any experience with these ones?
http://store.guitarfetish.com/coju20nepino.html

dude, the Neo9 rules for the bridge! I tried HS-3, some higher output virtual vintage dimarzio (vv solo, & solo pro) and the Neo9 was better than any of them. Serious stratty tone, but no icepick and plenty of output. And that was in the cheap Rondo, which doesn't sound very good "acoustically" if you know what I mean - kinda tinny sounding, but this pickup brought it to life.
Thanks! I'm thinking of trying a whole set, noiseless is good. :thumbsup:
Would you say the Neo9 is high output like a Wolfgang pickup or more of a mid gain?

Hey this looks like a cool gadget...
http://store.guitarfetish.com/neacpr.html
 
tekbow":202oyacy said:
that an original rampage?
It's an original Invader that was modded to Rampage specs. Bought it off Juggernaut here on on the forum. :)
 
Death by Uberschall":34gaugj5 said:
My Frankenstrat:

Plays beautifully.

Warmoth Pro neck, good parts, SD '78/EVH pup, OFR

002%20%282%29.JPG

just messed my pants... :scared:
 
My Vintage "Greenie" LP. Modeled after the Peter Green/Gary Moore LP including out of phase pups, mismatched knobs and relic'ing. All Tom Wilkinson h/w and pups. Less than $400 shipped from the UK. :rock:
IMG_1715.jpg

IMG_1717.jpg
 
tekbow":29rgjrd5 said:
Death by Uberschall":29rgjrd5 said:
My Frankenstrat:

Plays beautifully.

Warmoth Pro neck, good parts, SD '78/EVH pup, OFR

002%20%282%29.JPG

just messed my pants... :scared:
But, was it a good shite or a bad shite!!! :lol: :LOL:
 
billm408":1mfa73na said:
My Vintage "Greenie" LP. Modeled after the Peter Green/Gary Moore LP including out of phase pups, mismatched knobs and relic'ing. All Tom Wilkinson h/w and pups. Less than $400 shipped from the UK. :rock:
IMG_1715.jpg

IMG_1717.jpg
So Billm, what brand of geetar is that exactly?
 
Yngwie clone with YJM loaded pickguard, mim body, allparts scalloped neck. About $600

DSC_0363.jpg


Adam's old RG565, this thing is a mutant and had to adjust the neck once since I had it and yes it is a wizard profile.

GuitarIMG_6229.jpg


I have a Hamer USA Diablo that I scored for $425 that I dont have a picture of but it is 9-10 condition and that foofoo brazilian rosewood fretboard, dont PRS guys pay $1000 just for that??? :lol: :LOL:
 
Digital Jams":1iyep1g3 said:
Yngwie clone with YJM loaded pickguard, mim body, allparts scalloped neck. About $600

DSC_0363.jpg


Adam's old RG565, this thing is a mutant and had to adjust the neck once since I had it and yes it is a wizard profile.

GuitarIMG_6229.jpg


I have a Hamer USA Diablo that I scored for $425 that I dont have a picture of but it is 9-10 condition and that foofoo brazilian rosewood fretboard, dont PRS guys pay $1000 just for that??? :lol: :LOL:
How many years have you had that RG565?? Dammit man, put some strings on it!!! :D

How is the Yngwie clone...plays like butter or molasses?
 
Randy Van Sykes":21yynhu8 said:
Digital Jams":21yynhu8 said:
Yngwie clone with YJM loaded pickguard, mim body, allparts scalloped neck. About $600


Adam's old RG565, this thing is a mutant and had to adjust the neck once since I had it and yes it is a wizard profile.


I have a Hamer USA Diablo that I scored for $425 that I dont have a picture of but it is 9-10 condition and that foofoo brazilian rosewood fretboard, dont PRS guys pay $1000 just for that??? :lol: :LOL:
How many years have you had that RG565?? Dammit man, put some strings on it!!! :D

How is the Yngwie clone...plays like butter or molasses?

I see now what some scallope players have spoken about, double bends and vibratos are super slinky and after the 3rd or 4th fret there is no issue going sharp. 1st three frets you have to go light or you will go sharp.

The yingyang pickups make you work hard, way too hard for my crap chops :lol: :LOL: Super fun to play though.
 
Digital Jams":a0rx749q said:
The yingyang pickups make you work hard, way too hard for my crap chops :lol: :LOL: Super fun to play though.
Do what Yngwie does, you gotta boost the crap out of it!!!
 
Death by Uberschall":2eculk3k said:
Digital Jams":2eculk3k said:
The yingyang pickups make you work hard, way too hard for my crap chops :lol: :LOL: Super fun to play though.
Do what Yngwie does, you gotta boost the crap out of it!!!

Yeah a dod cranked up with a marshall 50 watt cranked up and they are not so hard to play through but you still have to play clean. Any other way they are a bit of a struggle.
 
Hamer Archtop... 16+ years old. I installed some BKP's and a split coil pot on it, thing plays like buttah - always has, always will, and still blows the doors off many of my Lesters and others in the 'tone' department. Ain't just me either, lots of cats have picked this thing up and say it sounds, plays and feels better than any top-line PRS out there.

Go figure.

Peace,
V.

PS - since these shots were taken, I've installed some bronzy colored witch-hat knobs on it, the old school Lester style that are amber in color. Looks and feels like none other. MONSTER in the tone and playability departments.
 

Attachments

  • Hamer1.JPG
    Hamer1.JPG
    213.9 KB · Views: 1,067
  • Hamer2.JPG
    Hamer2.JPG
    266.5 KB · Views: 1,060
Define cheap? My new Charvel was 500, which is pretty good but not dirt cheap I guess.

This horribly photographed Iceman was about 175 if I recall, and it's okay- not really giving any of my other guitars a run for their money, but nice.

Iceman.jpg
 
I have an old 94' Jackson Kelly "Pro" Professional from Japan... The neck on that thing slays babys :) I bought 5 new USA Kellys tryin to find the same playability, it just didnt happen.. Japan won that fight.
 
billm408":1yqgegk2 said:
glassjaw7":1yqgegk2 said:
So Billm, what brand of geetar is that exactly?

Vintage is the brand. It's a company in the UK that makes knock offs and reproductions. AFAIK, they're not sold in the US. Not sure if it's lawsuit issues or distribution problems. Here's a link. http://www.jhs.co.uk/vintageiconguitars.html

Yeah vintage used to be encore way way back didn't it? virtually every uk guitarists first guitar was a Vintage/encore, my first acoustic was
 
Back
Top