Lickliter amps PCB build new panels

[LickliterAmps]

Here is a sneak peak of my new amp model. The name of this amp to be revealed. I am almost to completion of my new PCB boards and hope to have the 1ST build to the Nashville amp expo in Sept of this year! The circuit is closely related to my XD100 design, but will have a 2ND gain control added. Each channel has a manual switch which incorporates less / more gain and bright switches on each channel. It will have a 3 button footswitch which incorporates (- channel - FX loop - solo -) The loop will be a series loop with send and return levels. The amp will have bias test points on the rear with adjustment on top of chassis. The chassis measures 24" wide X 8" deep. It will incorporate LED lights inside with the signature Lickliter front panel to reveal the top of chassis. The amp will come standard with EL34 or 6L6 power section.

 

[dooredge]

Keep on keepin' on Mike! Much success to you! I hope this amp sells really well for you.

 

[killertone]

Looks awesome!

 

[garey77]

Similar to the CCV with the 2nd gain?

 

[LickliterAmps]

Keep on keepin' on Mike! Much success to you! I hope this amp sells really well for you.

Thanks! Working hard to find a design that appeals to many styles of players.

Looks awesome!

Thanks Jason! Should sound as killer as it looks!

Similar to the CCV with the 2nd gain?

both gain controls will be active on the lead channel and the switch at control panel works as a OD1 / OD2 switch or vintage-modern mode.

 

[Kapo_Polenton]

So the gain on the clean channel will allow you to get up into those old school crunch tones like a Plexi would the more it turns up? (or green channel EVHIII)

 

[LickliterAmps]

So the gain on the clean channel will allow you to get up into those old school crunch tones like a Plexi would the more it turns up? (or green channel EVHIII)

It takes you from a crystal clean to a crunch mode via the switch on the control panel