Marshall 4x12 straight dimensions?

[tweed]

30x30x14 or 12?

or

29x29x14 or 12?

 

[Digital Jams]

Make sure you look for INSIDE measurements.

 

[tweed]

Make sure you look for INSIDE measurements.

don't have one to look inside of. I'm hoping someone here has looked inside one and can share some insight.

 

[Digital Jams]

Well I can measure and snap some shots of my mojo Aiken if you want to get you rolling at least with a parts list, I believe the mojo is the same size.

Do not skimp on the wood or your hard work is out the window imo.

 

[tweed]

Well I can measure and snap some shots of my mojo Aiken if you want to get you rolling at least with a parts list, I believe the mojo is the same size.

Do not skimp on the wood or your hard work is out the window imo.

Thanks bro! I got a couple sheets of 13layer voidless birch on a shelf begging for the saw.

 

[1big1]

exterior dimensions 29 3/8" h x 29 7/8 w x 14 d. w/o casters.
baffle opening 26 3/8 h x 26 7/8 w
can't measure the baffle depth w/o removing the grill cloth.. however the baffle angle appears to be three degrees. hope that helps.

 

[tweed]

exterior dimensions 29 3/8" h x 29 7/8 w x 14 d. w/o casters.
baffle opening 26 3/8 h x 26 7/8 w
can't measure the baffle depth w/o removing the grill cloth.. however the baffle angle appears to be three degrees. hope that helps.

Thanks!!!!

 

[moronmountain]

His measurements are correct, but I can't comment on the baffle angle. Just remember that Marshall uses 11ply birch not 13. So you either will have to match the outside or the inside. You can't match both.

 

[1big1]

you're welcome. if it also helps you the offset measurement of the grill cloth measured from the front of the cab at the cloth.. not the piping.. bottom 7/8" top 1 7/8".
i used an angle inclinometer to measure the angle.. so it should be close.

 

[Gainzilla]

Check this guys stuff out Randy, hes got all kinds of info...

http://colomar.com/Shavano/copy_cabinets.html

http://colomar.com/Shavano/construction.html

 

[tweed]

Check this guys stuff out Randy, hes got all kinds of info...

http://colomar.com/Shavano/copy_cabinets.html

http://colomar.com/Shavano/construction.html

Damn!! The MOTHERLODE!!! Thanks Kage!!

 

[stephen sawall]

Theres lots of good stuff there, thanks Kage - very cool.

 

[1big1]

bookmarked! thanks kage. you rawk bro.