
ghosty999
Well-known member
Selling my Marshall JMP-1 Pre-Amp, Excellent condition and recently has bee inspected and re-valved (TunSol TunSol AX7).
This is the UK/EU Spec power model so will require a converter if using in the US
Also comes with original JMP-1 Pedal that uses the dedicated 6PIN port on the back of the unit and has a very long cable. Getting hard to find!
Marshall JMP-1 at a Glance:
Four channels of pure tube tone.
A TON of control and programmability
Emulated outputs
Effects friendly amp
Tube At Heart
The JMP-1's valve driven heart (2x ECC83) drives pure tone into each of its four uniquely voiced channels - Clean 1, Clean 2, OD1 and OD2:
Clean 1 is perfect for warm full-bodied chords, fat clean lead passages and jazz tones.
Clean 2 has the glassy edge of a JTM45 for those bright, jangly tones.
OD1 - this channel's smouldering power will take you from the molten gold of a Super Lead Plexi, to searing metal and all points in-between.
OD2 - tightly focused, high gain is served up here by the truckload. Modern and aggressive, yet fluid and toneful. This channel has all the distortion and sustain you'll ever need.
Keep Control of Your Tone!
Each channel includes the following programmable controls; Volume, Gain, Bass, Middle, Treble and Presence, plus a Bass Shift option which re-shapes the low-end character of each channel. Its stereo, Parallel FX loop is also 100% programmable and has level selection, ensuring it is totally compatible with any effects device.
Program recall is instant either from the front panel, via the optional Marshall 4-way footswitch (the MPM4E) or via MIDI. Talking of MIDI, the JMP-1 has MIDI IN, OUT and THRU connections, a mapping facility and MIDI channel selection - ensuring it will fit seamlessly into any rack set-up.
Just the Right Amount Of I/O
In addition to the standard Left (L) and Right (R) Outputs, the JMP-1 also features L & R Speaker Emulated Outputs, the remarkable realism of which have received much critical praise. This facility not only presents your soundman or engineer with a totally controllable direct stereo signal, it also makes home or studio recording simple.
Plays Nicely with Effects
The Marshall JMP-1 is effects-friendly thanks to its programmable Parallel/Series FX loop and MIDI mapping facility, allowing the user to match a particular effect with any patch of choice.
PRICES:
USA: 549$ Including Postage
EU: 449 EURO Including Postage
UK: £399 Including Postage
This is the UK/EU Spec power model so will require a converter if using in the US
Also comes with original JMP-1 Pedal that uses the dedicated 6PIN port on the back of the unit and has a very long cable. Getting hard to find!
Marshall JMP-1 at a Glance:
Four channels of pure tube tone.
A TON of control and programmability
Emulated outputs
Effects friendly amp
Tube At Heart
The JMP-1's valve driven heart (2x ECC83) drives pure tone into each of its four uniquely voiced channels - Clean 1, Clean 2, OD1 and OD2:
Clean 1 is perfect for warm full-bodied chords, fat clean lead passages and jazz tones.
Clean 2 has the glassy edge of a JTM45 for those bright, jangly tones.
OD1 - this channel's smouldering power will take you from the molten gold of a Super Lead Plexi, to searing metal and all points in-between.
OD2 - tightly focused, high gain is served up here by the truckload. Modern and aggressive, yet fluid and toneful. This channel has all the distortion and sustain you'll ever need.
Keep Control of Your Tone!
Each channel includes the following programmable controls; Volume, Gain, Bass, Middle, Treble and Presence, plus a Bass Shift option which re-shapes the low-end character of each channel. Its stereo, Parallel FX loop is also 100% programmable and has level selection, ensuring it is totally compatible with any effects device.
Program recall is instant either from the front panel, via the optional Marshall 4-way footswitch (the MPM4E) or via MIDI. Talking of MIDI, the JMP-1 has MIDI IN, OUT and THRU connections, a mapping facility and MIDI channel selection - ensuring it will fit seamlessly into any rack set-up.
Just the Right Amount Of I/O
In addition to the standard Left (L) and Right (R) Outputs, the JMP-1 also features L & R Speaker Emulated Outputs, the remarkable realism of which have received much critical praise. This facility not only presents your soundman or engineer with a totally controllable direct stereo signal, it also makes home or studio recording simple.
Plays Nicely with Effects
The Marshall JMP-1 is effects-friendly thanks to its programmable Parallel/Series FX loop and MIDI mapping facility, allowing the user to match a particular effect with any patch of choice.








PRICES:
USA: 549$ Including Postage
EU: 449 EURO Including Postage
UK: £399 Including Postage