Micro POG - Where in chain? + chain help

[ol753]

Where would you put the Micro POG in this chain?
(im using a GCX so they aren't all "on" all the time; POG would only be used with prob powerscreamer/PQ3)

Guitar>
Furman PQ3 > RT Guitar Silencer > (Micro POG?) > Homebrew Mini CPR > Homebrew Powerscreamer
> Amp

FX Send>
Homebrew Mimic Delay > MR 10-Band EQ
>FX Return


PS, also, anyone see any warning lights in the way I have things setup? I'm a complete noob when it comes to knowing what's best or "right".

 

[Enjolras56]

Hmm... I would try it after the CPR. I personally use a Micro POG, but not a compressor- I believe pitch oriented stuff likes to see a compressed signal.

 

[university81]

i'd also put it after the compressor,

For your routing I'd probably go for:

Guitar >>

Furman PQ3 > Homebrew Mini CPR > Micro POG > Homebrew Powerscreamer > RT Guitar Silencer

>> Amp

FX Send>

MXR 10-Band EQ > ( RT Guitar Silencer) > Homebrew Mimic Delay

>FX Return

There's no absolute right or wrong way of routing stuff, as stuff will sound different each way, whether or not this sounds better depends on you

In my head the EQ in the loop is probably better before the delay, although i'm not sure there'd be a big difference between the two tbh,

i'd probably put the MXR 10 band in front of the amp and the PQ3 within the loop too

might be an idea to try the silencer in the FX loop as well to see

 

[ol753]

Cheers guys! huge help!

 

[glassjaw7]

i'd also put it after the compressor,

For your routing I'd probably go for:

Guitar >>

Furman PQ3 > Homebrew Mini CPR > Micro POG > Homebrew Powerscreamer > RT Guitar Silencer

>> Amp

FX Send>

MXR 10-Band EQ > ( RT Guitar Silencer) > Homebrew Mimic Delay

>FX Return

There's no absolute right or wrong way of routing stuff, as stuff will sound different each way, whether or not this sounds better depends on you

In my head the EQ in the loop is probably better before the delay, although i'm not sure there'd be a big difference between the two tbh,

i'd probably put the MXR 10 band in front of the amp and the PQ3 within the loop too

might be an idea to try the silencer in the FX loop as well to see

I have an MXR 10-band . It is somewhat ineffective when placed before the amp. It is much more effective in the loop. Either way will work, but I prefer eq in the loop by a long shot.