MUSICOMLAB Efx MkIV: Using MIDI with Strymon pedals

[jakecurranguitar]

Hey there,

I'm trying to hook up my strymon Mobius and Timeline to my Musicomlab mk IV with midi.
All I want to do is assign different patches(and combinations of patches) on the Mobius and Timeline to presets on the Musicom. A friend has helped guide me through it but I'm still encountering issues such as the mobius/timeline remaining on even when I switch to a musicom preset that does not use either strymon.

The mobius and timeline are not in any of the switchers audio loops, they're in the signal path directly after the switcher.

Something I would like to set up on the Musicom, for example (and I realise this is probably the easiest thing ever....but I'm hopeless) is:

Bank 2 Preset 1: Patch 1A on the Mobius
Bank 2 Preset 2: Patch 1B on the Mobius
Bank 2 Preset 3: Nothing. Clean signal.
Bank 2 Preset 4. Patch 2A on the Timeline
Bank 2 Preset 5: Patch 2A on the Timeline and Patch 2A on the Mobius

If anyone could lend a helping hand here and give me some advice I'd really appreciate it and will buy you a pint (or six) in Dublin sometime!!

Thanks very much,

Jake

 

[dfrattaroli]

Don't forget, you need to send the bypass command to strymon pedals on any presets that you don't want them on for. This way, if you turned them on for preset 1 on bank 2, you turn them off for any preset you go to after that where the strymon should be off.

 

[jakecurranguitar]

Thanks man.
I'm pretty sure I have done something similar.
The cc message to bypass the Strymons is 102 so ive set that as the Number on each midi channel.
I'm not sure how to send it to specific presets

 

[dfrattaroli]

IIRC, you have to go into the preset menu and program that CC for each preset that does not require the strymon pedal to be on.

 

[jakecurranguitar]

Thanks.
I've been trying for hours and am in the preset menu, for the life of me I cant figure out how to assign that CC message to a preset. For some reason its assigning the message to everything

 

[dfrattaroli]

Give me a chance to check my notes. I forgot how to do it myself.

 

[jakecurranguitar]

Hey dude I got it sorted out.
Had to add a 3rd page to IA mode and then toggle on/off the engage/bypass function for each pedal

thanks for the help!

 

[dfrattaroli]

Hey dude I got it sorted out.
Had to add a 3rd page to IA mode and then toggle on/off the engage/bypass function for each pedal

thanks for the help!

Ah yes! I had to add that page too. Glad you got it working. I have the 62M and love it.