Mxr 10 band eq..silver…

JackBootedThug

JackBootedThug

MURDERATOR
My brother hooked me up with this awhile back and I love it. 😻 anyway it has one input and two outputs. I’m having a hard time wrapping my head around this. How would I use this with two amps?leave everything in line as it is now with my one amp but how would I utilize the second output? Just into the loop of the second amp? Guitar-tuner-phase 90-Mxr od-rt rat-shaky Jimi-spaceman eq-noise clamp-aby-aby a to ns2-mxr eq-micro chorus-micro flanger-dd6-sonic stomp-amp.
Aby b-ban hammer-amp input with boss ms3 in the loop. Kinda complicated but it works and sounds glorious. When I run three amps at once I add another aby and run other stuff to amp 3. anyway do basically unhook everything from amp 2 and just run the second out from the mxr into the second amps send? Anyway thought I’d ask before blowing myself up or something…and don’t laugh..my setup works for me…😜😂
 
1754591534452.png
 
Just sends out two signal chains. I guess you can be creative with it.
 

Attachments

  • IMG_8755.png
    IMG_8755.png
    1.1 MB · Views: 14
I generally use mine to split the signal for various reasons. For example, if I put it in the loop of one amp, and then run the second output to the power amp of a second amp for stereo.

Another way I use it is to run my tube amps through a loadbox, then then put into this EQ, come out stereo into a stereo effects processor, and then into a stereo poweramp for reamping in stereo.
 
paulyc said:
Put the EQ at the end of the chain into two amps. That’s all you can do.
Click to expand...
End chain of everything......


And I know it may sound stupid but if you stack a 6 band EQ which actually has more cut and boost in frequencies....... and stack it with a 10 band at the end of chain......... your set for nothing but pure gold...... never tried it but yeah would be amazing I figure......


I prefer the 6 band but in either case EQ at the end of chain has always worked for me and IMO preferred than at the front or like a boost.
 
Have not fired it up yet but put it at the end of the chain. Everything normal into my 6505 but ran a line from out #2 into the send of my Windsors loop. Unplugged everything else going to the Windsor.
 
Odd. Barely any sound running into the pv’s send. Running into the high gain input with the pre gain at about 9 and mv at 9 also. Tones at 12, reso and presence at noon also. Full power on texture. It works that way….🤔🤪
 
JackBootedThug said:
Odd. Barely any sound running into the pv’s send. Running into the high gain input with the pre gain at about 9 and mv at 9 also. Tones at 12, reso and presence at noon also. Full power on texture. It works that way….🤔🤪
Click to expand...
So is it still giving you trouble or is it smooth now?
 
You must log in or register to reply here.
Back
Top