NAD: Marshall SV20 - Do I have the cabinet connected to the right jack?

[phillybhatesme]

Popped up on marketplace yesterday. Went to pick it up this morning.
Wanna make sure I plug this shit in properly. The cabinet has one connection and is labeled 8ohms.
Do I have it plugged into the right spot on the amp head?

 

[ZEN Amps]

I can’t read the label but if that’s the one that says 1x 8 up top you’re good to go.

 

[sandman]

For a single 8ohm cab i think i had to use the 8ohm jack just to the right of the one you are plugged into to get sound with my sv20h. Not sure why i had to use that jack only. Maybe something was wrong with mine.

 

[ZEN Amps]

For a single 8ohm cab i think i had to use the 8ohm jack just to the right of the one you are plugged into to get sound with my sv20h. Not sure why i had to use that jack only. Maybe something was wrong with mine.

Yep that sounds dicey, maybe a faulty jack.

 

[guitup too]

That jack is where I plug my 8 ohm cab in on my SC20 and it works fine.

 

[HellraiserJohnny]

Dude, That's a SicK amp!!!! Yes, you are plugged into the correct jack for that cabinet. Just be sure that cable is a speaker cable and not a guitar (shielded) cable.
Blast OFF!!!!

 

[shar-vell Dan]

Yes it seems so from here.

 

[phillybhatesme]

Dude, That's a SicK amp!!!! Yes, you are plugged into the correct jack for that cabinet. Just be sure that cable is a speaker cable and not a guitar (shielded) cable.
Blast OFF!!!!

Amp came with two cables and I have NO idea if either one is a speaker cable. The cable I'm using is 100% a speaker cable that I got with a different Marshall head.

 

[Briman24]

I had the exact same amp and cab in blue also! And same year as yours 2021!
If the previous owner didn't confirm with you that the cab speakers are stock and untouched, I would test the cab ohm with a multimeter to be sure.
But yeah that is the right plug for 8ohm.