NGD Breaking out my Spandex and Hairspray.

  • Thread starter Thread starter SandyRavage
  • Start date Start date
S

SandyRavage

Member
Drove all the way to San Diego for this guy and boy was it worth it. From what I gather it was a warmoth build painted by Marty Bell (who's work is flawless as usual) and was really put together and specced by someone who knew their stuff, no corners were cut at all.

Absolutely a stellar guitar, and plays easily as good or better than some of my older charvel, Jackson's, and Suhrs.







 
Hey! That was my build. I actually did the headstock and Marty did the body. The headstock is a decal I applied and then clear-coated. It's a killer guitar and sounded really good. Humbucker from Hell in the neck and Super D in the bridge both direct mounted... EVH zero friction pot...

Steve
 
Damn Steve you put together a hell of a guitar! I would love if you still had the original specs sitting around if you could PM them to me. I love the neck on this guy!
 
Here are the specs.

Neck:

Style: Arcade
Construction: Warmoth Pro Angled Construction
Orientation: Right Handed
Neck Wood: Birdseye Maple
Fingerboard Wood: Birdseye Maple
Nut Width: 1-11/16"
Back Shape: Standard thin
Fret Size: 6100
Tuner Ream: Planet Waves (13/32")
Radius: 10-16" Compound
Scale: 25-1/2"
Fret #: 22
Mounting Holes:
Pre-Cut
Installed String Nut: R4 Floyd Prep w/ Mounting Holes
Inlays: Black Face Dots
Finish: No Finish

Body:

Model: X-Bird
Orientation: Right handed
F-Holes: None
Scale: 25-1/2"
Wood: Alder
Rout: Rear Rout
Pickup Rout: Humbucker (Wood Mount) (N), None (Middle), Humbucker (Wood Mount) (B)
Controls: V-X-X-Tog-X (X-Bird)
Bridge: Floyd with Angled Pocket
Stud Install: Use inserts from bridge on order
Jack Rout: 7/8" (22mm) Side Jack Hole
Neck Pocket: Strat® Shape
Mounting Holes: Standard 4 Bolt

Steve
 
Oh my fuck this guitar is sweet!!!! Leave the spandex and hairspray in the vault, this is a bad motherfucker.
 
Didn't Uncle Ted play one of those in a Damn Yankees video?
Killer axe !
 
Back
Top