R
RACKSYSTEMS
Well-known member
Here is Pete's new rig for the Cornell touring season. The rig is based around his PT100 head and is supplemented by a Egnater M4 for more bassman and vox type tones. Basically you have the pedals you see in the Rjm switcher then then to the pedla board wha/vol/Eventide and back to the rack.Then there is a loop for the front end of the Axe fx [used for pedal simulations and or amp sounds]. Then another loop for the Eganater and another for the Pt100 preamp section. The the preamp choice then goes to the return of the PT100 and to a dry cab. We then take a custom line out of the head and that feeds the custom mixer and that feeds the Axefx back end [for timed base stuff]back to the mixer and out to a Randall RT50 power amp. Thanks to John Suhr for the custom mixer board design. Here you go.






