Post up some of your different CCV settings

[johnpace2]

Gat damn I'm going out of my mind with anticipation for mine!! It's on Mark's bench for completion and it's driving me nuts! Can't wait to get it!

Slow Your Roll Playa...

Roid Rage

It will be here soon enough. You guys make me jealous with your pictures and your settings!

 

[RoidRage]

Gat damn I'm going out of my mind with anticipation for mine!! It's on Mark's bench for completion and it's driving me nuts! Can't wait to get it!

Slow Your Roll Playa...

Roid Rage

It will be here soon enough. You guys make me jealous with your pictures and your settings!

In Time you will be right with us my Brutha!

R RAGE

 

[steve_k]

Threw a pair of V30's and a pair of K100's in a Mills AB today. Was trying to find what worked for me with the Twin Jet. Gave it a go, but wasn't all the way satisfied. Then I thought to plug the Cameron in and give it a spin with this combination. Holy batshit Robin....the CCV was breathing fire. I believe I will leave that cab as is and use it exclusively for the Cameron. Very shit hot.....

 

[steve_k]

Threw a pair of V30's and a pair of K100's in a Mills AB today. Was trying to find what worked for me with the Twin Jet. Gave it a go, but wasn't all the way satisfied. Then I thought to plug the Cameron in and give it a spin with this combination. Holy batshit Robin....the CCV was breathing fire. I believe I will leave that cab as is and use it exclusively for the Cameron. Very shit hot.....

This is a combo I have never tried. The mids in the V30's probably match up with the scooped k100's.

Day two and haven't changed it anymore. I think we have a keeper

The 100's, which I couldn't stand in the Diezel cab for any amp have been in the closet for a year. I used to have 4, now I have 3. Slipped and ran the damn soldering iron tip right through one of them

You never know how speakers of different wattage are going to go together. But, this is a good match and one doesn't overpower the other in the mix. I was debating whether to put them in an X or put the 100's on bottom. Went with an X and the sound dispersion is about equal. Not boomy or thin. Good crunch and nice thick leads and no cream on top. Since I like to run the mids a little more scooped than most (and you can get away with it on the CCV), it works out well. Too bad the 100's are made in China though.

Steve

 

[Ampaddict]

Here is my current fave CCV tone. Its based on my Jose HG tone in my Cameron modded Marshalls: (Although my rhythm tone 95% of the night is channel 1)

Channel 2 (all o'clock)

Punch: 2 switch middle
Pres: 2 Switch middle (I like to change around the switch to both sides but my live setting is the middle)

Gain: Switch Right
Bass: 12:45
Mid: Noon
Treb: Noon
Gain 2: 9:45 Bright Switch Mid
Gain 1: 9:45 Bright Switch Left
Gain Style switch: Right

 

[johnpace2]

for recording - in Oclock format

punch - 12 oclock - dip switch to the left
pres - 2 oclock - with dip switch in center

channel 1 - clean
volume - 4 oclock
bass - noon
mid - 11 oclock
treb 10:30
gain - 9:30 with dip switch to the right

channel 2 -
solo master - dip switch to the right
rhythm master - dip switch to the left
bass - noon
mid - 2 oclock
treb 2 oclock
gain2 noon - dip switch to left
gain1 noon dip switch to left

for Live and jamming pretty much the same except i crank up the bottom end and gain a tad....

Trying these settings right now and they sound killer!