Post your Herbert settings
- Thread starter Timonac
- Start date
Chan 1
Vol 10:30 Treb 10:00 Mid 11:30 Bass 12:00
Chan 2 (+ mode)
Gain 1:00 Vol 11:00 Treb 12:00 Mid 12:00 Bass 12:00
Chan 3
Gain 11:00 Vol 12:00 Treb 12:30 Mid 12:00 Bass 12:00
Mid-Cut (only added to Chan 3 when need modern sound)
Intens 9:30 Level 12:00
Master Section
Pres 12:00 Deep 12:00 Vol 1 8:00-10:00 Vol 2 (I don't use it)
I've tried all different gain settings, but always come back to the 1:00-1:30 range on Chan 2 +, and 11:00 to 11:45 range on Chan 3. That seems to be the fattest, smoothest, clearest area for gigging. I do have RFT's in V1 & V2, all other pre/power tubes stock type.
Vol 10:30 Treb 10:00 Mid 11:30 Bass 12:00
Chan 2 (+ mode)
Gain 1:00 Vol 11:00 Treb 12:00 Mid 12:00 Bass 12:00
Chan 3
Gain 11:00 Vol 12:00 Treb 12:30 Mid 12:00 Bass 12:00
Mid-Cut (only added to Chan 3 when need modern sound)
Intens 9:30 Level 12:00
Master Section
Pres 12:00 Deep 12:00 Vol 1 8:00-10:00 Vol 2 (I don't use it)
I've tried all different gain settings, but always come back to the 1:00-1:30 range on Chan 2 +, and 11:00 to 11:45 range on Chan 3. That seems to be the fattest, smoothest, clearest area for gigging. I do have RFT's in V1 & V2, all other pre/power tubes stock type.
van hellion
New member
i know im gonna sound crazy but my favorite lead sound (shawn lane, petrucci, steve lukather, self indulgent lead kinda thing 
) is ch 3 no mid cut, gain between 1 and 1:30, treble on the low side around 10:30 or 11:00 (i like dark lead tones) mid way up around 2:30 or 3:00, bass at noon, presence and depth to taste for me around 1:00 each. For my brighter sounding guitars depth at 1:30. this works well for me live. The clean and 2nd channel (+ position right) settings are pretty standard everything between 11:30 and 1:00 except mids on ch 2 they might get to 2:00 if i want more snarl.
peace
A Wood
) is ch 3 no mid cut, gain between 1 and 1:30, treble on the low side around 10:30 or 11:00 (i like dark lead tones) mid way up around 2:30 or 3:00, bass at noon, presence and depth to taste for me around 1:00 each. For my brighter sounding guitars depth at 1:30. this works well for me live. The clean and 2nd channel (+ position right) settings are pretty standard everything between 11:30 and 1:00 except mids on ch 2 they might get to 2:00 if i want more snarl.peace
A Wood
van hellion
New member
i posted because my settings constantly change, im sure a new thread can be helpful to some 
van hellion":3mfnffmy said:i posted because my settings constantly change, im sure a new thread can be helpful to some
I agree. When I look back at my last post, I see how different my settings are. What I thought was good back then, is much better now. It's like that with my other amps, as I age with them, I can fine tune them better and better. And also find what tubes they like. That's why I always give an amp a pretty long time to get to know. Like my recto, I really didn't like it for quite a while, but now it's a really sweet sounding amp.
You dont understand! There is an existing thread. The only thing you have to do is to search a little bit. There´s no need for two similar threads.
Here´s the Link: http://www.rig-talk.com/forum/viewtopic.php?f=14&t=1239
Here´s the Link: http://www.rig-talk.com/forum/viewtopic.php?f=14&t=1239